Ariens Path-Pro 136E User Manual Page 50
- Page / 80
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Table 10
-
PROGRAM Prompts
and Description.
1
NOTES:
The Series 920 leaves the factory programmed for a warm start. STOP
steps appear as a defautt until you program your 920.
Make photocopies, keep original clean.
PROGRAM
Prompt
1
Description
FILE?
I
Current system file to edit.
Range
1-10
Default
1
Your Settings
STEP
Select step number to view or edit.
Press MODE for step-type
prompt. To
change
steptype
use
the increment/decrement
key and press ENTER.
1-99
1
EV1
Enter
the Event Output 1 status.
Off or ON
--
Ev2
Enter
the Event Output 2 status.
OFF or ON
--
RETURN
Press the
ENTER
key to return to the SYSTEM prompt.
1
Press the MODE key to return to the STEP prompt.
I
JUMPLOOP
-
StepType
JS
I
Enter the step number the 920 will jump to.
1-99
I
1
I
JC
Enter
number
of
times
the 920
will
jump
to the step
indicated by JS.
0-100
0
RETURN
Press the ENTER key
to
return
to
the
SYSTEM
prompt
Press the MODE key to return to the STEP prompt.
WAITFOR
-
Step-Type
WPV
Enter a process variable to compare with the actual
temperature.
WHR
Enter the hours the 920 will wait relative to the beginning
of the step.
WMN
Enter the minutes the 920 will wait relative to the beglnnlng
of the step.
RETURN
Press the ENTER key
to
return to the SYSTEM prompt
RAL to RAH
--
0
-
23 hours
-
0
-
59
minutes
-
1
Press the MODE key to return to the STEP prompt.
I
AUTOSTART
-
Step-Type
DAY
1
Enter the number of days for the 920 to wait until
I I
AUTOSTART takes place.
0-
6days
---
HOUR
Enter the number of hours for the 920 to wait for the
time-of-
day dock
before
AUTOSTART takes place.
0
-
23 hours
--
MIN
Enter the number of minutes for the 920 to wait for
day clock before AUTOSTART takes place.
0
-
59
minutes
-
RETURN Press the ENTER key
to
return to the SYSTEM prompt.
Press the MODE key
to
return to the STEP prompt.
STOP
-
Step-Type
STOP
Press ENTER
to
display
the
last
step
of the program.
RETURN
Press the ENTER key
to
return to the SYSTEM
prompt.
Press the MODE key to return to the STEP prompt.
LINK
-
StepType
FILE?
1
The
current
system file will always link to
Step 1 in the file specified.
1-10
1
RETURN
Press the ENTER key to return to the SYSTEM prompt.
Press the MODE key to return to the STEP prompt
50
WATLOW
Series
920 User’s Manual
How To Program the
Serles
920, Chapter 6
- Series 920 1
- Safety Information 2
- Your Program 3
- Contents 4
- Figures, Tables and Charts 5
- Chapter 1 6
- Starting out with the 6
- Watlow Series 920: 6
- Packing List 7
- How to Open the 920 8
- How to Set the DIP Switches 8
- User’s Manual 9
- Operating 10
- Chapter 11
- Keyboard Area 13
- Where To Go From Here 13
- A Brief Overview 14
- Enter Real Time of Day 14
- Before Entering Your Program 15
- Programming. File 1 15
- Step 4 must be 16
- Editing Your Program 17
- Adding an AUTOSTART Step Type 17
- Running Your Series 920 19
- Chapter 4 20
- How to Check for Ground Loops 22
- Noise Suppression Devices 22
- Available from Watlow 22
- C.M.Line Filter 23
- Installation Information 24
- Installation Procedure 24
- How to Wire the Series 920 25
- Power Wiring 26
- T.C. Compensation 27
- Load from 30
- Temperature Conrol 32
- How to Tune the Series 920 33
- Series 920 User’s 34
- Chapter 6 36
- How To Program The Series 920 36
- Event Outputs 37
- Guaranteed Soak 37
- The Four 38
- JUMPLOOP 38
- Rules to Follow 39
- SYSTEM Menu 40
- .:.:.:.: 41
- SETUP Menu 42
- Represents the 45
- PROGRAM Menu 49
- StepType 50
- To Program 52
- 920, Chapter 6 52
- Chart I- Master Step Chart 53
- Chapter 7 54
- Alarm Types 55
- The Operating Band 56
- Alarm Limits 57
- Clearing An Alarm Message 58
- An Alarm And The State 58
- The Alarm Relay 58
- Appendix 59
- Series 920 Specifications 59
- 920 User’s Manual 60
- 61
- Type J, K, or T 62
- Reference Compen 62
- Equipment Required 63
- Setup and Calibration 63
- @)(sJ(g; 64
- Glossary 67
- Accepts the sensor input and 68
- Isolation: 70
- ON/OFF control: 71
- WATLOW Series 920 73
- Manual 73
- Thermal System: 74
- Safety Information, 2 76
- Warranty Information 77
- Returning Merchandise 77
- Shipping Claims 77
- Series 920 Error Codes/Alarms 78
- Clearing an Error Code 79
- How to Clear an Alarm Code 79
- Series 920 Quick 80
- Reference 80
Related products and manuals for Garden tools Ariens Path-Pro 136E
Garden tools Ariens 920013 Specifications
(40 pages)
(40 pages)
Garden tools Ariens 915501 Service Manual
(44 pages)
(44 pages)
Garden tools Ariens 986101 User Manual
(2 pages)
(2 pages)
Garden tools Ariens 920012 User Manual
(42 pages)
(42 pages)
Garden tools Ariens 920012 User Manual
(42 pages)
(42 pages)
Garden tools Ariens 920013 User Manual
(8 pages)
(8 pages)
Garden tools Ariens 920013 Operator's Manual
(41 pages)
(41 pages)
Garden tools Ariens 920012 User Manual
(32 pages)
(32 pages)
© 2020, manymanuals.com. All rights reserved. | 0.410 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals