Ariens Path-Pro 136E User Manual Page 24
- Page / 80
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Installation Information
n
T
0
CAUTION:
The front panel
screw turns
90°
only. Do not apply
excessive force or
turn the screw more
than
90°.
Figure
12
-
Series 920 Faceplate
Dimensions.
The Series 920 mounts in a
panel
cutout with two brackets. These brackets
hold
the case against
the
front
panel.
The Series 920 behind-panel dimensions
are 3.56 in.
(90.42mm)
high by 3.56 in.
(90.42mm)
wide by 6.0 in.
(152.4mm)
deep.
If
your unit has a
triac
output, add another 2.5 in
(63.5mm)
to the depth.
Figure
12
shows the dimensions of the front
panel
bezel.
The 920 weighs 2.75
lbs.
(1.25Kg).
For unit dimensional and mounting information, including the location of mount-
ing brackets and size of the front
panel
cutout, see Figures 13 and 14. Your
panel’s thickness can be from 0.06
(1.5mm)
to 0.25 in.
(6.3mm).
Installation Procedure
Follow
this procedure
to
mount the
Watlow
Series 920 Temperature Control:
1.
2.
Make a
panel
cutout per the dimensions in Figure 14.
Remove the 920 from its case by turning the front
panel
screw
90°
counter-
clockwise
(CCW).
Grip the bezel
firmly
and
pull
the control chassis out of
the case.
3.
4.
Place the case in
the
cutout you just made.
Attach the mounting brackets either to the top and bottom, or to both sides
of the unit.
5.
Tighten the mounting brackets securely against your panel.
6.
Insert the
control
chassis into its case and press the bezel to seat it. Turn
the front
panel
screw
90°
clockwise (CW) to
lock
the control in place. The
hardware installation is complete. Go on to the wiring section from here.
3.81 Sq.
1~
(96.77mm)
‘-1
1
3.81 Sq.
(96.77mm)
I
24
WATLOW
Series
920
User’s
Manual
How to
Install
and Wire, Chapter 4
- Series 920 1
- Safety Information 2
- Your Program 3
- Contents 4
- Figures, Tables and Charts 5
- Chapter 1 6
- Starting out with the 6
- Watlow Series 920: 6
- Packing List 7
- How to Open the 920 8
- How to Set the DIP Switches 8
- User’s Manual 9
- Operating 10
- Chapter 11
- Keyboard Area 13
- Where To Go From Here 13
- A Brief Overview 14
- Enter Real Time of Day 14
- Before Entering Your Program 15
- Programming. File 1 15
- Step 4 must be 16
- Editing Your Program 17
- Adding an AUTOSTART Step Type 17
- Running Your Series 920 19
- Chapter 4 20
- How to Check for Ground Loops 22
- Noise Suppression Devices 22
- Available from Watlow 22
- C.M.Line Filter 23
- Installation Information 24
- Installation Procedure 24
- How to Wire the Series 920 25
- Power Wiring 26
- T.C. Compensation 27
- Load from 30
- Temperature Conrol 32
- How to Tune the Series 920 33
- Series 920 User’s 34
- Chapter 6 36
- How To Program The Series 920 36
- Event Outputs 37
- Guaranteed Soak 37
- The Four 38
- JUMPLOOP 38
- Rules to Follow 39
- SYSTEM Menu 40
- .:.:.:.: 41
- SETUP Menu 42
- Represents the 45
- PROGRAM Menu 49
- StepType 50
- To Program 52
- 920, Chapter 6 52
- Chart I- Master Step Chart 53
- Chapter 7 54
- Alarm Types 55
- The Operating Band 56
- Alarm Limits 57
- Clearing An Alarm Message 58
- An Alarm And The State 58
- The Alarm Relay 58
- Appendix 59
- Series 920 Specifications 59
- 920 User’s Manual 60
- 61
- Type J, K, or T 62
- Reference Compen 62
- Equipment Required 63
- Setup and Calibration 63
- @)(sJ(g; 64
- Glossary 67
- Accepts the sensor input and 68
- Isolation: 70
- ON/OFF control: 71
- WATLOW Series 920 73
- Manual 73
- Thermal System: 74
- Safety Information, 2 76
- Warranty Information 77
- Returning Merchandise 77
- Shipping Claims 77
- Series 920 Error Codes/Alarms 78
- Clearing an Error Code 79
- How to Clear an Alarm Code 79
- Series 920 Quick 80
- Reference 80
Related products and manuals for Garden tools Ariens Path-Pro 136E
Garden tools Ariens 920013 Specifications
(40 pages)
(40 pages)
Garden tools Ariens 915501 Service Manual
(44 pages)
(44 pages)
Garden tools Ariens 986101 User Manual
(2 pages)
(2 pages)
Garden tools Ariens 920012 User Manual
(42 pages)
(42 pages)
Garden tools Ariens 920012 User Manual
(42 pages)
(42 pages)
Garden tools Ariens 920013 User Manual
(8 pages)
(8 pages)
Garden tools Ariens 920013 Operator's Manual
(41 pages)
(41 pages)
Garden tools Ariens 920012 User Manual
(32 pages)
(32 pages)
© 2020, manymanuals.com. All rights reserved. | 1.502 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals