Ariens 992808-ProZoom 3166S Specifications Page 17

  • Download
  • Add to my manuals
  • Print
  • Page
    / 76
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 16
GB - 17
Moving the Unit with the Engine Off
If the mower engine stalls and will not restart, the unit can be
pushed or towed for short distances with the pump bypass
valves open. Do not exceed 5 m.p.h. (8 km/h) when towing.
IMPORTANT: The bypass valves must be opened two full
turns (maximum) before the unit is moved (see figure 11).
Be sure the bypass valves are closed before running the
mower again. Failure to fully close the bypass valves before
operation could result in hydraulic system damage.
TOWING
The mower is designed for towing in light duty applications
only. Do not attempt to tow more than 300 lbs. (137 kg).
Tongue weight is not to exceed 30 lbs (13.61 kg).
LOADING THE MOWER
The loading ramp should be long enough that the angles
between the truck or trailer do not exceed 15 degrees. A
steeper angle may cause the mower deck components to
get hung up when moving the mower from ramp to truck or
trailer. If loading on or near a slope, position the truck or
trailer on the down side of the slope and the ramps should
extend up the slope. This will minimize the ramp angle. The
trailer or truck should be parked as level as possible to
facilitate smooth loading of the mower.
TRANSPORTING THE MOWER
Use a heavy duty trailer or truck to transport the mower.
Make sure the trailer or truck has all of the necessary
lighting and markings as required by law.
Ariens Dealers will provide any service, parts or adjustments
which may be required to keep your unit operating at peak
efficiency. Should engine require service, contact an Ariens
or an authorized engine manufacturer's service center.
MAINTENANCE SCHEDULE
IMPORTANT: Some working conditions (heavy loads, high
ambient temperatures, dusty conditions, or airborne debris)
may require more frequent service.
See engine manual for further maintenance and
troubleshooting information.
NOTE: To have full access to the engine, the seat must be
tipped forward (seeTipping Seat Forward on page 19) and
the hood opened.
WARNING: Exercise care when turning the
mower while towing. The mower will turn more
sharply than the towed object.
IMPORTANT: Attempting to tow more than
300 pounds (137 kg) with the Ariens mower will
lead to premature parts failure and void the
warranty.
Figure 11
Bypass Valves
WARNING: Exercise extreme caution when
loading and unloading the unit from a ramp.
Use only a single, full width ramp. If individual
ramps are necessary, use several to simulate a
single full width ramp. Use enough ramps to
create an unbroken ramp surface wider than
the unit.
Never exceed a 15 degree angle between the
ramps and the truck or trailer when loading the
mower.
Avoid sudden acceleration and deceleration of
the unit when loading and unloading the unit to
avoid the mower from tipping backward.
WARNING: When transporting the mower,
make sure the steering control levers are in the
park position, the wheels have been blocked,
the machine has been securely fastened by
cables, chains or ropes, and the trailer has
been secured to the towing vehicle with safety
chains.
MAINTENANCE SCHEDULE
WARNING: AVOID INJURY. Read and
understand entire Safety section before
proceeding.
Page view 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 75 76

Comments to this Manuals

No comments