Ariens 992808-ProZoom 3166S Specifications download pdf (Page 3)

GB - 3

Customer Note: If the Dealer does not register your

product, please fill out, sign and return the product

registration card to Ariens or go to www.ariens.com on the

internet.

UNAUTHORIZED REPLACEMENT PARTS

Use only Ariens replacement parts. The replacement of any

part on this equipment with anything other than an Ariens

authorized replacement part may adversely affect the

performance, durability, and safety of this unit and may void

the warranty. Ariens disclaims liability for any claims or

damages, whether regarding warranty, property damage,

personal injury or death arising out of the use of

unauthorized replacement parts.

NOTE: To locate your nearest Ariens Dealer, go to

www.ariens.com.

DISCLAIMER

Ariens reserves the right to discontinue, change, and

improve its products at any time without public notice or

obligation to the purchaser. The descriptions and

specifications contained in this manual were in effect at

printing. Equipment described within this manual may be

optional. Some illustrations may not be applicable to your

unit.

DEALER DELIVERY

Dealer should:

1. Test brakes after unit is assembled to be sure

adjustment has not been disturbed in shipment (see

Parking Brakes on page 13.) Brake is properly

adjusted at factory.

2. Check the safety interlock system to make sure that it

is functioning properly. With operator on seat, unit must

not start unless steering levers are in neutral (N) and

Power Takeoff (PTO) is disengaged (Off). Engine must

stop if operator leaves seat when steering levers are in

any drive position or PTO is engaged (On). See Safety

Interlock System on page 12.

3. Fill out Original Purchaser Registration Card and

return the card to Ariens.

4. Explain Limited Warranty Policy.

5. Explain recommended lubrication and maintenance.

Advise customer on adjustments. Instruct customer on

controls and operation of unit. Discuss and emphasize

the Safety Precautions. Give customer

Owner/Operator, Parts, and Engine Manuals. Advise

customer to thoroughly read and understand them.

SAFETY ALERT SYMBOL

These are safety alert symbols. They mean:

•ATTENTION!

•PERSONAL SAFETY IS INVOLVED!

When you see this symbol:

•BECOME ALERT!

•OBEY THE MESSAGE!

SIGNAL WORDS

The safety alert symbols above and signal words below are

used on decals and in this manual.

Read and understand all safety messages.

NOTATIONS

NOTE: General reference information for proper operation

and maintenance practices.

IMPORTANT: Specific procedures or information required to

prevent damage to unit or attachment.

SAFETY

WARNING: This cutting machine is capable of

amputating hands and feet and throwing

objects. Failure to observe the safety

instructions in the manuals and on decals

could result in serious injury or death.

Slopes are a major factor related to

loss-of-control and tip-over accidents.

Operation on all slopes requires extra caution.

Tragic accidents can occur if the operator is not

alert to the presence of children. Never

assume that children will remain where you

last saw them.

Gasoline is extremely flammable and the

vapors are explosive, handle with care.

Disengage attachment, stop unit and engine,

remove key, engage parking brake, and allow

moving parts to stop before leaving operator’s

position.

OL1253

OL3900

DANGER: IMMINENTLY HAZARDOUS

SITUATION! If not avoided, WILL RESULT in

death or serious injury.

WARNING: POTENTIALLY HAZARDOUS

SITUATION! If not avoided, COULD RESULT

in death or serious injury.

CAUTION: POTENTIALLY HAZARDOUS

SITUATION! If not avoided, MAY RESULT in

minor or moderate injury. It may also be used

to alert against unsafe practices.

1 2 3 4 5 6 7 8 ... 75 76

Comments to this Manuals

No comments

Ariens 992808-ProZoom 3166S Specifications Page 3

Comments to this Manuals

Related products and manuals for Lawnmowers Ariens 992808-ProZoom 3166S