Ariens 926502 - PB936 Specifications download pdf (Page 6)

GB - 6

Before separating brush attachment from unit frame,

remove fuel so no spills will occur. Ensure unit is

secure and will not tip over during maintenance.

ALWAYS keep protective structures, guards, and

panels in good repair, in place and securely fastened.

NEVER modify or remove safety devices.

DO NOT change engine governor settings or

over-speed engine.

Fumes from engine exhaust can cause injury or death.

DO NOT run engine in an enclosed area. Always

provide good ventilation.

ALWAYS maintain unit in safe operating condition.

Damaged or worn out muffler can cause fire or

explosion.

Keep all hardware properly tightened.

Maintain or replace safety and instruction labels, as

necessary.

NEVER store unit with fuel in fuel tank, inside a

building where any ignition sources are present such

as hot water heaters, space heaters, or clothes dryers.

Allow the engine to cool before storing in any

enclosure.

Shut off fuel and allow engine to cool completely before

storing in closed area or covering unit.

For extended storage, clean unit thoroughly. See

Engine Manual for proper storage.

Use only attachments or accessories designed for your

unit.

Check components frequently. If worn or damaged,

replace with manufacturer’s recommended parts.

Tools Required:

• Open-End Wrenches: 3/8, 7/16, 1/2, 9/16" and/or

Adjustable Wrench

• Tire Gauge

Unpacking Unit

Unfold Handlebar (Figure 3)

1. Remove the lower and loosen the upper wing

knobs on the handlebar assembly.

2. Loosen the wing nuts on the shift rod.

3. Put the speed selector lever in the first forward

position.

4. Rotate the handlebars into operating position.

5. Install and tighten all wing knobs and wing nuts

on the handlebar assembly and shift rod.

Check Function of Dual Handle Interlock

Without the engine running, press down (engage) both

clutch levers. Release attachment clutch lever.

Attachment clutch should remain engaged until traction

clutch lever is released, then both clutches must

disengage. If they do not, contact your dealer for

repairs.

Check Tire Pressure

Check tire pressure and adjust to the pressure listed on

tire sidewall.

ASSEMBLY

WARNING: AVOID INJURY. Read and

understand the entire Safety section

before proceeding.

WARNING: Dropping or tipping over

boxed unit could result in personal injury or

damage to unit.

1.Wing Knobs

2.Wing Nut

3.Bolt

4.Shift Rod

5.Speed Selector

Lever

Figure 3

OS3020

2, 3

1 2 3 4 5 6 7 8 9 10 11 ... 20 21

Comments to this Manuals

No comments

Ariens 926502 - PB936 Specifications Page 6

Comments to this Manuals

Related products and manuals for Garden tools Ariens 926502 - PB936