Ariens SNO-THRO 938019 - 522 Specifications download pdf (Page 19)

GB - 19

TROUBLESHOOTING

PROBLEM PROBABLE CAUSE CORRECTION

Engine will

not crank

1. Ignition switch not in

"RUN" position.

2. Bad starter or wire

connection.

3. Electrical problem

1. Turn key to "RUN" position.

2. Check connections. See your Dealer.

3. Check wiring for wear, damage or poor

connections. See your Dealer.

Engine will

not start

1. Ignition switch not in

"RUN" position.

2. Bad starter or wire

connection.

3. Engine ignition

problem.

4. Fuel tank is empty.

5. Clogged fuel ﬁlter.

1. Turn key to "RUN" position.

2. Check connections. See your Dealer.

3. See Engine Manual.

4. Fill tank with properly mixed fuel.

Prime engine, set choke for easier

start.

5. Replace fuel ﬁlter.

Engine stops

1. Improperly mixed or

contaminated fuel.

2. No spark.

3. Clogged fuel ﬁlter.

1. Use only clean, properly mixed fuel. If

necessary, drain tank and reﬁll with

new fuel mixture.

2. Check spark plug and connecting wire.

3. Replace fuel ﬁlter.

Discharge

chute will not

turn

1. Chute gears are

frozen.

1. Move unit to a warm area to thaw.

Auger will not

turn or throw

snow

1. Auger is frozen in

place.

2. Ice or debris is

obstructing auger.

3. Auger control cable

out of adjustment.

4. Drive belt slipping;

idler out of

adjustment.

1. Move unit to a warm area to thaw.

2. With engine off, and auger

disengaged, check for obstructions

and remove.

3. Adjust cable. See To Adjust Auger

Control Cable.

4. Adjust idler. See To Adjust Idler

Position.

ACCESSORIES

See your authorized Ariens Dealerto add

these optional accessories.

73800300 Discharge Chute Crank Kit

(938019)

73800100 Electric Starter Kit (938019)

SERVICE PARTS

Be sure to always use genuine Ariens

parts to keep your unit running like new.

Part no. Qty Description

07236300 1 Drive Belt

03810600 1 Scraper Blade

02910800 1 Fuel Filter

1 2 ... 14 15 16 17 18 19 20 21 22 23

Comments to this Manuals

No comments