Ariens 920013 Specifications download pdf (Page 9)

EN - 9

INSTALL DISCHARGE CHUTE

AND DISCHARGE CHUTE CRANK

(Figures 5 and 6)

1. Grease underside of discharge chute

ring (if not already greased).

2. Remove mounting hardware from auger

housing.

3. Install discharge chute over opening in

the auger housing. Finger tighten the

mounting hardware removed in step 2.

NOTICE: Leave discharge chute pedestal

loose to help install the chute crank.

4. Remove gear cover from top of chute

pedestal.

5. Slide Chute Crank through the nylon

bushing in the support bracket under

control panel.

NOTICE: Be careful not to damage nylon

bushing when attaching crank to the control

panel.

6. Connect the chute crank to the pinion

gear on discharge chute with spring clip

pin.

7. Replace gear cover on top of chute

pedestal.

8. Orient the chute and pedestal to its most

vertical position and tighten pedestal

hardware to 14.8 – 31.0 lbf-ft

(20 – 42 N•m).

Figure 5

4

5

3

2

1. Mounting Holes

2. Discharge Chute

3. Discharge Chute Ring

4. Chute Pedestal

5. Mounting Hardware

1

Figure 6

1. Chute Crank

2. Support Bracket

3. Pinion Gear

4. Spring Clip Pin

1

2

3

4

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 43 44

Comments to this Manuals

No comments