Ariens 920013 Specifications download pdf (Page 30)

EN - 30

• If roller is less than 1/2" (12.7 mm)

from frame, loosen idler adjustment

nut and move idler closer to the belt.

Tighten adjustment nut and recheck

the roller clearance (Figure 30).

• If roller is more than 7/8" (22.2 mm)

from frame, loosen idler adjustment

nut and move idler away from the belt.

Tighten adjustment nut and recheck

roller clearance (Figure 30).

Check Attachment Brake

(Figure 31)

1. With the attachment clutch lever

disengaged, brake pad must contact

attachment belt. With attachment clutch

lever engaged, brake pad must be more

than 1/16" (1.6 mm) from belt. If there is

more than 1/16" (1.6 mm) gap, go to

Check Belt Finger Clearance on

page 30. If there is less than 1/16"

(1.6 mm) gap, go to Step 2.

2. If there is less than 1/16" (1.6 mm) gap

between brake pad and belt.

a. Loosen idler adjustment nut, and

move idler away from belt.

Position idler to achieve a 1/16"

(1.6 mm) minimum brake pad gap

and a 1/2 – 7/8" (12.7 – 22.2 mm)

gap between the plastic roller and

the frame.

IMPORTANT: If adjustments cannot be

brought into specified ranges see your Dealer

for repairs.

Check Belt Finger Clearance

(Figure 32)

1. With attachment clutch lever engaged,

the belt finger located opposite the belt

idler must be less than 1/8" (3.2 mm)

from belt, but not touching the belt.

To adjust belt finger, loosen the bolts and

move the finger to the proper position.

Tighten the bolts and recheck the belt

finger clearance.

2. Replace the belt cover and tighten

hardware.

Figure 30

2

1. Idler Adjustment Nut

2. Attachment Belt Idler

1

Figure 31

Minimum of 1/16" (1.6 mm)

1. Brake Arm and Pad

2. Attachment Pulley

1

2

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 43 44

Comments to this Manuals

No comments