Ariens 920013 Specifications download pdf (Page 15)

EN - 15

CONTROLS AND FEATURES

See Figures 9 – 11 for all Controls and

Features locations.

Dual Handle Interlock

When Attachment Clutch and then Traction

Drive Clutch are engaged, the Attachment

Clutch will remain engaged (lever down) if

released. To stop attachment, release

Traction Drive Clutch and both clutches will

disengage.

Traction Drive Clutch –

Left Hand Lever

Squeeze the Traction

Drive Clutch Lever

against the Handlebar (1)

to engage wheel drive for

propelling unit. Forward

speed will vary according

to snow depth and

moisture content.

Release lever (2) to stop

movement.

NOTICE: When traveling to or from the area

to be cleared, press down on the handlebars

enough to raise the front of the unit slightly off

the surface. Engage the traction drive clutch

without engaging the attachment clutch.

Attachment Clutch –

Right Hand Lever

Squeeze Attachment

Clutch Lever against

handlebar (1) to

engage attachment.

Release both clutch

levers (2) to disengage

power and apply brake

to attachment.

IMPORTANT: If the belt squeals continuously

when the attachment clutch lever is engaged,

the impeller may be frozen in the auger

housing. Immediately release the attachment

clutch lever and move the unit into a heated

area to thaw.

NOTICE: If belt squeals continuously when

impeller turns freely, see Attachment

Clutch/Brake Adjustment on page 28.

Ignition Switch

Operate the ignition switch with the

removable key. To start the engine, turn the

key to Start (1). To stop the engine, turn the

key to Off (2).

Primer Bulb

Pushing the primer bulb in

adds fuel for easier engine

start. Refer to Starting and Shut

Off on page 19.

Speed Selector

Position the Speed Selector in the

appropriate speed notch to control forward

and reverse travel.

Forward:

(6) Fastest

(1) Slowest

Reverse:

(1) Slow

(2) Fast

IMPORTANT: DO NOT change motion from

forward to reverse with clutch engaged.

Forward speed can be changed without

declutching.

OPERATION

WARNING: AVOID INJURY. Read

and understand the entire Safety

section before proceeding.

WARNING: To avoid injury to hands

and feet, always disengage clutches,

shut off engine, and wait for all

movement to stop before unclogging

or working on snow thrower.

Keep hands and feet away from

auger and impeller.

1

2

1

2

2

1

1

26

1

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 43 44

Comments to this Manuals

No comments