Ariens 932 Series Service Manual download pdf (Page 25)

6 - 25

6.1 LOWER HANDLEBAR

1. Remove bolts attaching lower handlebar to each

side of frame and remove lower handlebar.

2. Check parts for wear or replacement.

3. Assemble, using reverse procedure.

6.2 ATTACHMENT CLUTCH HANDLE

See Figures 20 and 21.

1. Remove jam nut, bushings, and bolt holding clutch

handle and pivot to upper handlebar. Remove pivot

and disconnect clutch handle from clutch cable.

2. Remove retaining ring from clutch cable.

3. Remove cable.

4. Disconnect spring from lever.

5. Check parts for wear or replacement.

6. Assemble using reverse procedure.

6.3 WHEEL DRIVE CLUTCH LEVER &

TRACTION CABLE

See Figures 20 and 21.

1. Remove jam nut, bushings, and bolt holding pivot

and wheel drive clutch lever to upper handle bar.

Remove pivot and wheel drive clutch lever.

2. Remove retaining ring holding traction clutch cable

to lever.

3. Remove traction clutch cable.

4. Check parts for wear or replacement.

5. Assemble using reverse procedure.

SECTION 6 - HANDLEBARS & CONTROLS

1. Chute Crank Handle

2. Speed Selector Lever

3. Attachment Clutch Arm

4. Clutch Cable Spring

5. Clutch Cable

6. Traction Clutch Arm

7. Speed Selector Rod

8. Traction Clutch Cable

Figure 20

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 38 39

No comments

Ariens 932 Series Service Manual Page 25