Ariens 992807-ProZoom 60 Specifications download pdf (Page 42)

GB - 42

Blades Won’t

Rotate

1. Deck belt worn, loose or

broken.

2. Deck belt off pulley.

3. Clutch failed.

1. Replace deck belt.

2. Reinstall deck belt.

3. Contact dealer.

Mower Places

Load on Tractor

1. Engine RPM too low.

2. Ground speed too fast.

3. Excessive grass buildup under

deck.

1. Use full-throttle position.

2. Reduce ground speed.

3. Clean underside of deck.

Excessive

Mower Deck

Noise

1. Excessive grass buildup under

deck.

1. Clean underside of deck.

Engine Idling

Poorly

1. Carburetor incorrectly

adjusted.

2. Improper spark plug gap.

1. Contact Dealer.

2. Check and regap spark plugs.

Engine

Backfires

1. Carburetor adjusted

incorrectly.

1. Contact Dealer.

Engine Runs

But Unit Won’t

Move

1. Drive belt loose or broken.

2. Hydraulic reservoir oil low.

3. Pump bypass valve open.

4. Hydraulic oil filter plugged.

5. Bad pump or motor.

1. Tighten or replace drive belt.

2. Refill reservoir.

3. Close bypass valve.

4. Replace hydraulic oil filter.

5. Contact Dealer.

Unit Loses

Power or

Hydraulic

System

Overheats

1. Hydraulic oil reserve too low.

2. Hydraulic oil reservoir out of

cap.

1. Refill reservoir.

2. Overfill or water contaminated.

Loss of Power

or System Will

Not Operate in

Either Direction

1. Restrictions in air cleaner.

2. Poor compression.

3. Steering linkage needs

adjustment.

4. Hydraulic bypass valve open.

5. Pump belt broken or worn.

6. Pump belt off of pulley.

1. Service air cleaner.

2. Contact Dealer.

3. Contact Dealer.

4. Close bypass valve.

5. Replace belt.

6. Reinstall belt on pulley.

Engine

Overheats

1. Air intake screen clogged.

2. Cooling fins clogged.

1. Service air intake screen.

2. Clean fins.

Engine Stalling

While Blades

Engaged

1. Operator not in seat.

2. Faulty safety system.

3. Spindle bearing failure.

4. Blades locked by foreign

matter.

1. Sit on seat.

2. Contact Dealer.

3. Contact Dealer.

4. Clean underside of deck.

Low Engine Oil

Pressure

1. Low oil level.

2. Oil diluted or too light.

1. Add oil.

2. Change oil and locate source

of contamination.

High Oil

Consumption

1. Numerous possibilities. 1. Contact Dealer.

TROUBLESHOOTING

PROBLEM PROBABLE CAUSE CORRECTION

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Comments to this Manuals

No comments