Ariens 992807-ProZoom 60 Specifications Page 43

  • Download
  • Add to my manuals
  • Print
  • Page
    / 50
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 42
GB - 43
Engine Will Not
Turn Over
1. Dead Battery.
2. Bad ground connection.
3. Poor terminal connection at
battery.
4. Poor wiring harness
connections.
5. Bad parking brake switch.
6. Bad PTO switch.
7. Steering control levers not in
park position.
8. PTO switch engaged.
9. Operator not in seat.
10. Blown fuse.
1. Charge battery. See Battery
Maintenance on page 30.
2. Correct the connection.
3. Correct the connection.
4. Correct the connection.
5. Contact Dealer.
6. Contact Dealer.
7. Place steering control levers in
park position.
8. Disengage switch.
9. Sit in seat.
10. Replace fuse.
Engine Turns
Over But
Doesn’t Start –
There Is Spark
at Spark Plug.
1. No fuel or line plugged.
2. Bad fuel solenoid.
3. Dirt in fuel filter.
4. Dirt or water in fuel or stale
fuel.
5. Incorrect fuel in fuel system.
6. Choke is not on.
1. Fill tank or replace line. See
FILLING FUEL TANK on
page 19.
2. Contact Dealer.
3. Replace fuel filter.
4. Contact Dealer.
5. Drain tanks and replace with
proper fuel.
6. Move choke lever to on
position.
Engine Turns
Over But
Doesn’t Start –
There Is No
Spark at Spark
Plug.
1. PTO switch is on.
2. Steering levers are not in park
position.
3. No operator in seat.
4. Bad seat switch.
5. Bad parking brake switch.
1. Turn off PTO switch.
2. Return levers to park position.
3. Sit in seat.
4. Contact Dealer.
5. Contact Dealer.
Tractor Jerky
When Starting,
or Operates in
One Direction
Only.
1. Steering control levers need
adjustment.
2. Hydraulic pump failure.
3. Wheel motor failure.
4. Bypass valve open.
1. Contact Dealer.
2. Contact Dealer.
3. Contact Dealer.
4. Close bypass valve.
Tractor Creeps
When Steering
Levers Are in
Neutral
Position.
1. Steering control levers need
adjustment.
1. Contact Dealer.
Tractor Circles
or Veers.
1. Steering control levers need
adjustment.
2. Hydraulic pump failure.
3. Wheel motor failure.
4. Tires improperly inflated.
1. Contact Dealer.
2. Contact Dealer.
3. Contact Dealer.
4. Adjust tire pressure.
TROUBLESHOOTING
PROBLEM PROBABLE CAUSE CORRECTION
Page view 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 49 50

Comments to this Manuals

No comments