EN - 19
GENERAL LUBRICATION
(Figure 8)
1. Place unit into the service position (See
Service Position on page 16).
IMPORTANT: Wipe each fitting clean before
and after lubrication. DO NOT allow grease or
oil to get on friction disc, friction plate or belts.
2. Apply Hi-Temp Grease or equivalent to
the lubrication fittings after the first 16
hours of use and every 8 hours
thereafter. See Service Parts on
page 28.
3. Apply a few drops of oil to the roller
chain at the beginning of the season or
every 25 operating hours.
NOTE: Brush attachment gear case is
lubricated at the factory and should not
require additional lubrication.
4. Place unit into the operating position
(See Operating Position on page 17).
Comments to this Manuals