Ariens 926057 Specifications download pdf (Page 8)

EN - 8

Tools Required:

•Tire Gauge

• Pliers

• 1/2-In. 3/8-In, 7/16-In, and 9/16-In

Wrench and/or Adjustable Wrench

Unpacking Unit

Unfold Handlebar

(Figure 3)

1. Remove the lower and loosen the upper

hardware on the handlebar assembly.

2. Loosen the hardware on the shift rod.

3. Put the speed selector lever in the

second reverse position.

4. Rotate the handlebars into operating

position.

IMPORTANT: Be careful not to damage cable

spring hooks when rotating handlebars

upward.

5. Install and tighten all hardware on the

handlebar assembly and shift rod.

Check Function of Dual Handle

Interlock

Without the engine running, press down

(engage) both clutch levers. Release

attachment clutch lever. Attachment clutch

should remain engaged until traction clutch

lever is released, then both clutches must

disengage. If they do not, contact your Dealer

for repairs.

ASSEMBLY

WARNING: AVOID INJURY. Read

and understand the entire Safety

section before proceeding.

WARNING: Dropping or tipping

over boxed unit could result in

personal injury or damage to unit.

Figure 3

1. Handlebar Hardware

2. Shift Rod Hardware

3. Shift Rod

4. Speed Selector Lever

1

3

2

4

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 33 34

Comments to this Manuals

No comments