Ariens 926057 Specifications Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 34
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
EN - 11
STANDARD CONTROLS
See Controls and Features on page 10.
Traction Drive Clutch -
Left Hand Lever
Squeeze the Traction
Drive Clutch Lever
against the handlebar
(1) to engage wheel
drive for propelling unit.
Release lever (2) to
stop movement.
IMPORTANT: When traveling to or from an
area to be cleared, press down on the
handlebars enough to raise the front of the
unit slightly off the surface. Engage the
traction drive clutch without engaging the
attachment drive clutch.
NOTE: Traction drive clutch should be
engaged before the attachment clutch when
brushing.
Attachment Drive Clutch - Right Hand
Lever
Squeeze Attachment Clutch
Lever against handlebar (1) to
engage attachment. Release
both clutch levers (2) to
disengage power to
attachment.
IMPORTANT: If the belt
squeals when the attachment
clutch lever is engaged, the
attachment drive may be
frozen. Immediately release
the attachment clutch lever
and move the unit into a
heated area to thaw.
NOTE: If belt squeals when brush runs freely,
(see Attachment Clutch Adjustment on
page 21).
Dual Handle Interlock
When Attachment Clutch and then Traction
Drive Clutch are engaged, the Attachment
Clutch Lever will remain engaged (down) if
released. To stop attachment, release
Traction Drive Clutch Lever and both clutches
will disengage.
Choke Control Lever
1.Choke Closed position (lever
to left): chokes off air to engine
for easier start.
2.Choke Open position (lever to
right): allows for normal
operation.
Gradually open choke after
engine starts.
Engine Shut-Off Switch
(Figure 5)
1. Set the engine shut off switch to the On
position to start and operate the engine.
2. Set the engine shut off switch to the Off
position to shut off a running engine.
OPERATION
WARNING: AVOID INJURY. Read
and understand the entire Safety
section before proceeding.
WARNING: To avoid injury to
hands and feet, always disengage
clutches, shut off engine, and wait
for all movement to stop before
unclogging or working on brush.
Keep hands and feet away from
brush.
1
2
ON
OFF
Figure 5
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 33 34

Comments to this Manuals

No comments