Ariens 926324 Specifications download pdf (Page 24)

EN - 24

GENERAL LUBRICATION

(Figure 17)

IMPORTANT: Wipe each fitting clean before

and after lubrication.

IMPORTANT: DO NOT allow grease or oil to

get on friction disc, friction plate or belts.

NOTICE: Apply Ariens Hi-Temp Grease or

equivalent to the lubrication fittings. See

SERVICE PARTS on page 34.

Sno-Thro should be lubricated (Figure 17) at

beginning of season or every 25 operating

hours.

Auger Shaft

To grease auger shaft, remove shear bolt

nuts and shear bolts per instructions in Shear

Bolts on page 26. Apply grease at the grease

zerks and then turn the auger assemblies on

the auger shaft. Replace shear bolts.

Apply oil to auger shaft end bushings.

Figure 17

Oil

Grease

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 39 40

Comments to this Manuals

No comments