Ariens 92 Specifications download pdf (Page 17)

GB - 17

To ensure adequate lubricant level:

1. Remove ﬁller plug (Figure 5). Lubricant

must be at least up to bottom of lubricant

ﬁller hole with unit resting on a level

surface.

2. Add lubricant if required. Allow oil to drain

to level of plug and replace plug.

IMPORTANT: Use only Ariens special gear

lubricant L-2 (Part Number 00008000).

GENERAL LUBRICATION

IMPORTANT: Wipe each ﬁtting clean before

and after lubrication.

IMPORTANT: DO NOT allow grease or oil to

get on belts.

NOTE: Apply Sten Mix Hi-Temp Grease or

equivalent to the lubrication ﬁttings.

Sno-Thro should be lubricated at beginning of

season or every 25 operating hours (Figure 6).

Auger Shaft

To grease auger shaft, remove shear bolt nuts

and shear bolts. Turn auger on shaft while

applying grease at zerk ﬁttings. Replace shear

bolts.

Auger Gearcase

Filler Plug

OS1871

Figure 5

OS1843

Grease

Oil

Figure 6

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 25 26

Comments to this Manuals

No comments