Ariens ProZoom 99480600-1952S Specifications Page 24
- Page / 44
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
GB - 24
Removing Traction Drive Belt:
1. Park machine safely. (See Parking Safely in the SAFETY
section.)
2. Remove mower deck drive belt. (See Replacing Mower Deck
Drive Belt in the SERVICE MOWER section.)
3. Remove two cap screws (A).
4. Remove rear shield (B).
Picture Note: Traction drive belt idler pulley bottom view.
5. Insert 1/2 in. breaker bar into hole (C) and rotate idler pulley
(D) forward to ease tension on traction drive belt.
6. Remove traction drive belt (E).
Installing Traction Drive Belt:
NOTE: Install the traction drive belt (E) in front of anchor cap screw
(F).
1. Install traction drive belt (E) on drive sheaves (G) as shown.
Ensure that traction drive belt is positioned in front of anchor
cap screw (F).
2. Insert 1/2 in. breaker bar into hole (C) and rotate idler pulley
(D) forward for additional clearance to install traction drive belt.
3. Install rear shield.
4. Install mower deck drive belt.
Checking and Adjusting Motion Control Linkages
NOTE: Check and adjust motion control linkages with the machine
parked on a hard, level surface.
Checking Motion Control Linkages:
1. Park machine safely. (See Parking Safely in the SAFETY
section.)
2. Rotate speed control bar (A) to full forward position.
3. With engine off, move motion control levers (B) until they
contact the speed control bar (A). A slight deflection should be
seen in the linkage rod (C).
NOTE: Check machine tracking after making adjustments.
4. Start the engine and run until it reaches normal operating
temperature.
5. Stand on the operator’s platform and, with the park brake
released, move the motion control levers (B).
6. Observe wheel movement as motion control levers are moved
back and forth. Wheels should travel in the correct direction as
the levers are moved.
7. Move motion control levers to neutral position. If rear wheels
continue to rotate, a return to neutral (RTN) adjustment is
required.
CAUTION: Avoid injury! Tensioning spring is under high
tension. Wear gloves and safety glasses, and use a
spring puller to install and remove spring.
MX20167
C
F
G
D
G
MX20168
CAUTION: Avoid injury! Engine exhaust fumes contain
carbon monoxide and can cause serious illness or death.
Move the machine to an outside area before running the
engine.
Do not run an engine in an enclosed area without
adequate ventilation.
• Connect a pipe extension to the engine exhaust pipe
to direct the exhaust fumes out of the area.
• Allow fresh outside air into the work area to clear the
exhaust fumes out.
CAUTION: Avoid injury! Be aware of bystanders.
- Pro Zoom 1
- REQUIRED OPERATOR TRAINING 4
- SAFETY DECALS AND LOCATIONS 4
- Safety Decals 4
- Operator Training Required 5
- Preparation 5
- Operating Safely 5
- Using a Spark Arrestor 5
- Checking Mowing Area 6
- Parking Safely 6
- Rotating Blades are Dangerous 6
- Protect Children 6
- Avoid Tipping 6
- Keep Riders Off 7
- Avoid High Pressure Fluids 7
- Checking Wheel Hardware 7
- Wear Appropriate Clothing 7
- Maintenance and Storage 7
- Prevent Fires 8
- Tire Safety 8
- Handling Fuel Safely 8
- Assembly 9
- ASSEMBLY 9
- Surfaces 10
- Operator Station Controls 10
- Miscellaneous Controls 10
- OPERATION 10
- Adjusting Cutting Height 11
- Setting Cutting Height 12
- HOLE LOCATIONS 12
- Using Park Brake 13
- Using the PTO 14
- Sharp Right Turn: 16
- Starting Engine 16
- Engaging Mower 16
- Stopping the Engine 16
- Servicing Your Machine 18
- Service Lubrication 18
- MAINTENANCE SCHEDULE 18
- Lubricating Pump Idler Pivot 19
- Service Engine 20
- SERVICE AND ADJUSTMENTS 20
- Checking Spark Plug 21
- Adjusting Carburetor 21
- Replacing Fuel Filter 21
- Service Transmission 22
- Drive Belt 23
- Removing Traction Drive Belt: 24
- Tracking 25
- Service Steering & Brakes 26
- Service Mower 27
- Checking Mower Blades 28
- Replacing Mower Blades 29
- Sharpening Blades 29
- Balancing Blades 29
- Service Electrical 29
- Service the Battery Safely 29
- Removing: 30
- Installing: 30
- Using Booster Battery 30
- Service Miscellaneous 31
- Filling Fuel Tank 32
- Checking Tire Pressure 33
- TROUBLESHOOTING 34
- Electrical System 35
- Park Brake 36
- Steering 36
- Mower Deck 36
- Storing Safety 37
- Preparing Machine for Storage 37
- SPECIFICATIONS 38
- SERVICE PARTS 39
- Two-Year Limited Lawn and 42
- Garden Commercial Warranty 42
- Limitations 43
- Disclaimer 43
Related products and manuals for Lawnmowers Ariens ProZoom 99480600-1952S
Lawnmowers Ariens 911156 Specifications
(28 pages)
(28 pages)
(58 pages)
Lawnmowers Ariens 915067 - 1740 User Manual
(110 pages)
(110 pages)
Lawnmowers Ariens Zoom XL 54 Specifications
(36 pages)
(36 pages)
Lawnmowers Ariens 931016 S-12 User Manual
(32 pages)
(32 pages)
Lawnmowers Ariens G422SL Owner's Manual
(12 pages)
(12 pages)
Lawnmowers Ariens A21A42 Specifications
(32 pages)
(32 pages)
© 2020, manymanuals.com. All rights reserved. | 1.151 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals