Ariens ProZoom 99480600-1952S Specifications Page 14

  • Download
  • Add to my manuals
  • Print
  • Page
    / 44
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 13
GB - 14
Using the PTO
Engage PTO:
1. Stand on operator’s platform with motion control levers in the
neutral position.
2. Start engine.
3. Release park brake.
4. Move throttle lever to the 1/2 to 3/4 fast position.
5. Pull PTO knob (A) up to engage mower deck.
6. Move throttle lever forward to the fast position for mowing.
Disengage PTO:
1. Push PTO knob (A) down.
2. Set park brake.
Using the Throttle
Push throttle lever (A) forward to the fast position (B) when
mowing.
Move throttle lever (A) to the half fast position (C) when
starting and warming the engine.
Pull throttle lever (A) backward to the slow position (D) to idle
engine. Do not run engine at slow idle any longer than
necessary for cooldown after mowing.
Using the Hourmeter
NOTE: The machine is equipped with an electric start. The
hourmeter will continue to run with the key switch in the run
position.
Hourmeter (A) shows number of hours the machine has been
operated.
Use hourmeter and SERVICE INTERVAL section to determine
when machine needs service.
Using the Motion Control Levers
The functions of the motion control levers are:
Steering.
Acceleration.
Deceleration.
Neutral Position
Picture Note: Motion control levers (A) shown in the neutral
position.
Machine speed, motion and direction can be controlled when
the engine is running and park brake is unlocked.
Operator can exit the mower with the engine running when the
park brake is locked and the PTO switch is disengaged.
MX12847
CAUTION: Avoid injury! Learn use of the motion control
levers and practice at half throttle until becoming
proficient and comfortable with the operation of the
machine.
Do not move motion control levers from forward to
reverse or reverse to forward position rapidly. Sudden
direction changes could cause loss of control or damage
the machine.
MX20091
Page view 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 43 44

Comments to this Manuals

No comments