Ariens ProZoom 99480600-1952S Specifications download pdf (Page 10)

GB - 10

Daily Operating Checklist

• Make sure all necessary guards and shields are safely and

securely attached. Check for loose, missing, or damaged

parts.

• Remove mower deck belt shields. Clean grass and debris from

belt area.

• Remove grass and debris from machine and mower deck.

• Remove grass and debris from operator station foot plate,

pump drive belt compartment, hydraulic pump and pump

mounting plate.

• Test park brake.

• Test safety systems.

• Check battery.

• Check for oil leaks.

• Check engine oil and hydraulic oil levels.

• Check all belts for damage or cracking.

• Check engine air filter.

•Check mower level.

• Adjust cutting height if necessary.

• Check wheel bolt torque. Tighten if necessary.

• Check tire air pressure. Check tires for damage or cracking.

• Check and adjust speed control linkages and lock.

Avoid Damage to Plastic and Painted

Surfaces

• Do not wipe plastic parts unless rinsed first.

• Insect repellent spray may damage plastic and painted

surfaces. Do not spray insect repellent near machine.

• Be careful not to spill fuel on machine. Fuel may damage

surface. Wipe up spilled fuel immediately.

• Prolonged exposure to sunlight will damage the hood surface.

Operator Station Controls

Picture Note:

A. Speed Control Bar Lock

B. Speed Control Bar

C. Left Motion Control Lever

D. Right Motion Control Lever

E. Hydrostatic Oil Reservoir Cap and Dipstick

F. Ignition Key Switch

G. Fuel Tank Cap

H. PTO Switch

I. Hour Meter

J. Choke

K. Throttle Lever

L. Park Brake Lever

Miscellaneous Controls

A. Free-Wheeling Valves

OPERATION

WARNING: AVOID INJURY. Read and understand entire

Safety section before proceeding.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 43 44

Comments to this Manuals

No comments

Ariens ProZoom 99480600-1952S Specifications Page 10

Comments to this Manuals

Related products and manuals for Lawnmowers Ariens ProZoom 99480600-1952S