Ariens ProZoom 99480600-1952S Specifications download pdf (Page 16)

GB - 16

Sharp Right Turn:

MX12793

• Push left motion control lever forward and pull right motion

control lever rearward at the same time.

Starting Engine

1. Stand on operator’s platform.

2. Lock park brake.

3. Put motion control levers (A) in the NEUTRAL position.

4. Push PTO switch knob (B) down to disengage PTO.

5. Move throttle lever (C) to set engine speed at the 1/2 to 3/4

fast position.

6. Position choke knob (D):

• Cold engine: Pull knob up to the CHOKE position.

• Warm/Hot engine: If necessary, pull knob up to the CHOKE

position.

7. Turn key switch (E) to the START position.

8. Release key to the RUN position when engine starts.

9. With engine started:

• Push choke knob to the OFF position.

• Move throttle lever to the FAST position.

• Unlock park brake.

Engaging Mower

1. Adjust mower deck to desired cutting height.

2. Start engine.

3. Move throttle lever (A) to the 1/2 to 3/4 fast position.

4. Unlock park brake.

NOTE: In cold weather or with a new machine, allow engine to

reach operating temperature before engaging PTO to prevent

engine from stalling.

5. Pull PTO knob (B) up to engage mower deck.

6. Move throttle lever to the fast position (C).

NOTE: The travel speed and turn rate will vary with the amount that

the motion control levers are moved.

7. Push motion control levers (D) forward slowly. Mow at a safe

travel speed.

Stopping the Engine

1. Lock park brake.

2. Reduce engine speed to half-throttle.

3. Turn key switch to STOP position (C).

4. Remove key.

CAUTION: Avoid injury! Engine exhaust fumes contain

carbon monoxide and can cause serious illness or death.

Move the machine to an outside area before running the

engine.

Do not run an engine in an enclosed area without

adequate ventilation.

• Connect a pipe extension to the engine exhaust pipe

to direct the exhaust fumes out of the area.

• Allow fresh outside air into the work area to clear the

exhaust fumes out.

MX20091

CAUTION: Avoid injury! Clear mowing area of all

bystanders when operating this machine. Thrown objects

could cause serious injury or death.

Keep hands and feet away from blades and discharge

opening.

Do not mow in reverse unless absolutely necessary.

IMPORTANT: Avoid damage! To help prevent damage to PTO

clutch:

• Do not engage PTO with throttle in the fast position.

IMPORTANT: Avoid damage! To help prevent engine

backfiring, throttle lever should be set at the half-speed

position prior to stopping the engine.

Do not stop engine when mower is on a slope of more than 30

degrees for an extended period of time. Oil may run through

valve train into carburetor and muffler.

MX20091

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 43 44

Comments to this Manuals

No comments

Ariens ProZoom 99480600-1952S Specifications Page 16

Comments to this Manuals

Related products and manuals for Lawnmowers Ariens ProZoom 99480600-1952S