Ariens ProZoom 99480600-1952S Specifications Page 23

  • Download
  • Add to my manuals
  • Print
  • Page
    / 44
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 22
GB - 23
13. Unlock park brake.
14. Cycle motion control levers forward and rearward several
times. Check for leaks around filter.
15. Stop engine. Check oil level. Add oil as necessary to bring oil
level to FULL mark on dipstick.
Cleaning Hydraulic Oil Pump Cooling Fins
1. Park machine safely. (See Parking Safely in the SAFETY
section.)
2. Remove four cap screws (A).
3. Remove rear shield (B) to access hydraulic pumps (C).
4. Clean hydraulic oil cooling fins on each hydraulic pump with a
rag, brush or compressed air.
5. Clean area around hydraulic pumps and frame.
Checking and Replacing Pump Traction
Drive Belt
NOTE: The traction drive belt will not require a tension adjustment.
Belt is self-adjusted using a spring tensioner.
Checking Traction Drive Belt:
1. Park machine safely. (See Parking Safely in the SAFETY
section.)
2. Remove two cap screws (A).
3. Remove rear shield (B).
4. Inspect belt (C) through frame openings (D) for excessive
wear, damage or stretching.
CAUTION: Avoid injury! Help prevent serious bodily
injury. Remain alert to other people and the surroundings
when operating the machine.
CAUTION: Avoid injury! Compressed air can cause
debris to fly a long distance.
Clear work area of bystanders.
Wear eye protection when using compressed air for
cleaning purposes.
Reduce compressed air pressure to 210 kPa
(30 psi).
IMPORTANT: Avoid Damage! To ensure proper cooling, keep
the cooling fins clean at all times. Operating the machine with
obstructed cooling fins could cause damage due to
overheating.
CAUTION: Avoid injury! Fingers or loose clothing can
get caught in rotating parts. Stop engine and wait for all
moving parts to stop before servicing.
MX20111
Page view 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 43 44

Comments to this Manuals

No comments