Ariens ProZoom 99480600-1952S Specifications Page 13

  • Download
  • Add to my manuals
  • Print
  • Page
    / 44
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 12
GB - 13
Testing PTO Switch
1. Stand on operator’s platform with motion control levers in the
neutral position.
2. Lock park brake.
3. Pull PTO switch up to engage.
4. Turn key switch to the start position.
Result: The engine must not crank.
Testing Park Brake Switch
1. Push PTO switch down to disengage.
2. Unlock park brake.
3. Turn key switch to the start position.
Result: The engine must not crank.
Testing Neutral Switch (Start)
1. Lock park brake.
2. Push PTO switch down to disengage.
3. Push one motion control lever forward.
4. Turn key switch to the start position.
Result: The engine must not crank.
Testing Neutral Switch (Run)
1. Lock park brake.
2. Push PTO switch down to disengage.
3. Start engine.
4. Push one motion control lever forward.
5. Repeat procedure using the other lever.
6. Repeat procedure pushing each motion control lever rearward.
Result: The engine must stop when either lever is moved from
neutral position.
Testing Operator Presence Switch
NOTE: Ensure OPC switch bracket is depressed when standing on
operator’s station.
1. Stand on operator’s platform with motion control levers in the
NEUTRAL position.
2. Start engine.
3. Unlock park brake.
4. Step completely off operator’s platform.
Result: The engine must stop.
NOTE: Ensure OPC switch bracket is depressed when standing on
operator’s station.
5. Stand on operator’s platform with motion control levers in the
NEUTRAL position and start engine.
6. Pull PTO switch up to engage.
7. Step completely off operator’s platform.
Result: The engine must stop.
Testing the Park Brake
MIF
1. Stop machine on a 17° slope (30% grade) facing downhill.
Stop the engine and lock the park brake.
2. Repeat procedure with machine facing uphill.
Result: Park brake must hold the machine stationary. (Machine
should move no more that 61cm (24 in.) in one hour.) If machine
moves more than that, brakes need to be adjusted. See your
authorized dealer or refer to Adjusting Park Brake in the SERVICE
STEERING AND BRAKES section.
Using Park Brake
Locking Park Brake
Raise park brake lever (A) to lock park brake.
Unlocking Park Brake:
Lower park brake lever (A) to unlock park brake.
CAUTION: Avoid injury! Thrown objects can be
dangerous. Before operating the attachment:
Clear area of bystanders, especially children.
Pick up objects which may be thrown by the attachment.
MX20102
Page view 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

Comments to this Manuals

No comments