Ariens 915131-1334 Specifications download pdf (Page 27)

GB - 27

Unit does not

move with

engine running

when using

steering levers.

1. The transmission

bypass lever is

engaged.

1. Disengage transmission bypass lever (see

MOVING UNIT MANUALLY on page 15).

2. Faulty hydrostatic

belt.

2. Replace hydrostatic belt (see REPLACING

HYDROSTATIC BELT on page 25).

3. Faulty

transmission.

3. Contact your Ariens Dealer.

PTO or mower

blades do not

engage or shut

off.

1. Operator

presence switch

not depressed.

1. Depress operator presence switch by sitting

on seat.

2. Faulty operator

presence switch.

2. Contact your Ariens Dealer.

3. Clutch actuator is

loose or

disconnected.

3. Connect wiring to PTO actuator.

Properly connect PTO actuator cable to the

deck cable anchor or to deck idler arm.

4. Faulty PTO belt. 4. Replace PTO belt (see REPLACING PTO

BELT on page 24).

5. Faulty PTO

switch, wires,

connectors, or

clutch.

5. Contact your Ariens Dealer.

Engine

overheats.

1. Engine oil level

low.

1. Add engine oil. Refer to Engine Manual for

detailed instructions.

2. Cooling system

plugged.

2. Clean cooling system. Refer to Engine

Manual for detailed instructions.

3. Faulty engine. 3. Contact your Ariens Dealer.

Unit moves with

engine off and

parking brake

engaged.

1. The parking brake

needs

adjustment.

1. Contact your Ariens Dealer.

2. Faulty parking

brake.

2. Contact your Ariens Dealer.

Unit does not

travel in a

straight line.

1. Incorrect tire

pressure.

1. Check tire pressure (see SPECIFICATIONS

on page 29)

.

2. Steering levers

need adjustment.

2. Adjust steering levers (see Forward Speed

Adjustment on page 24)

3. Hydrostatic

transmission

and/or linkage

needs

adjustment.

3. Contact your Ariens Dealer.

Unit creeps with

steering levers

in neutral

position.

1. Hydrostatic

transmission

and/or linkage

needs

adjustment.

1. Contact your Ariens Dealer.

Poor cutting

quality.

1. Mower deck not

level or mower

pitch is incorrect.

1. Level and adjust pitch of mower deck (see

LEVELLING AND ADJUSTING PITCH OF

MOWER DECK on page 20).

2. Dull or faulty

mower blades.

2. Sharpen mower blades (see SHARPENING

MOWER BLADE on page 21) or replace

mower blades (see REPLACING MOWER

BLADE on page 21).

PROBLEM PROBABLE

CAUSE

CORRECTION

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 56 57

Comments to this Manuals

No comments