Ariens 915131-1334 Specifications download pdf (Page 14)

GB - 14

Steering Levers

• Reverse (1) – Pull both steering levers

backward.

• Forward (2) – Push both steering

levers forward.

• Left (3) – Pull left steering lever back

or push right steering lever forward or

a combination of both.

• Right (4) – Pull right steering lever

back or push left steering lever

forward or a combination of both.

NOTE: To stop, return both steering levers to

neutral.

NOTE: The steering levers must be in the

neutral position to start the engine.

NOTE: The parking brake must be

disengaged prior to moving the steering

levers from the neutral position.

Mower Lift Pedal (Figure 5)

Raises and lowers mower deck.

Press mower lift pedal and install adjustment

pin in the desired adjustment hole.

NOTE: The adjustment pin is used to set the

height of the mower deck. See

SPECIFICATIONS on page 29 for cutting

height dimensions.

Fuel Level

Slot in seat plate shows the fuel level in the

tank. Refill when level gets to bottom of slot.

FILLING FUEL TANK

1. Clean fuel cap and surrounding area to

prevent dust, dirt, and debris from

entering fuel tanks.

2. Remove fuel cap.

IMPORTANT: See Engine Manual for correct

type and grade of fuel.

3. Fill fuel tank to below bottom of filler

neck. See SPECIFICATIONS on

page 29 for capacity of fuel tanks.

4. Replace fuel cap.

STOPPING IN AN EMERGENCY

Bring steering levers back to neutral, set

parking brake, and turn off engine.

STARTING AND SHUTTING OFF

ENGINE

Starting the Engine

NOTE: Disengage the PTO, place the

steering levers in neutral, and engage the

parking brake prior to starting the engine.

1. If the engine is cold, move the choke

control to the On position. If the engine

is warm or hot, do not use choke.

1

2

3

4

1. Mower Lift

Pedal

2. Adjustment

Hole

3. Adjustment Pin

Figure 5

3

2

1

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 56 57

Comments to this Manuals

No comments