Ariens 915131-1334 Specifications download pdf (Page 24)

GB - 24

Forward Speed Adjustment

(Figure 18)

NOTE: Reverse speed cannot be adjusted. If

unit tracks excessively left or right in reverse,

see your Dealer for repair.

IMPORTANT: The unit should track within 2

feet (0.61 m) of a straight line for 30 feet

(9.14 m).

The travel of the steering levers may need

adjustment if the unit turns to the right or left

when both steering levers are pushed as far

forward as possible.

NOTE: The side the unit turns toward

indicates that the wheel on that side is turning

slower than the other wheel. Either the wheel

that is turning faster needs to slow down or

the wheel that is turning slower needs to

speed up to allow the unit to travel in a

straight line.

1. Determine which way the unit turns.

2. Loosen jam nut on the adjustment bolt.

3. Adjust speed by:

• Turning adjustment bolt clockwise to

decrease steering lever travel.

• Turning adjustment bolt

counterclockwise to increase steering

lever travel.

4. Tighten the jam nut.

REPLACING PTO BELT

Remove (Figure 19)

1. Lower mower deck to the ground.

2. Remove belt covers from mower deck.

3. Disconnect the PTO actuator cable from

the deck idler arm.

4. Pull idler arm towards outside of unit

until tension is removed from PTO belt.

5. Remove PTO belt from left mower deck

pulley.

6. Slowly release idler arm until tension is

removed from idler spring.

7. Remove PTO belt from mower deck and

engine drive pulley.

Figure 18

1. Forward Travel Adjustment Bolt

2. Steering Lever

2

1

CAUTION: Use care when

releasing idler spring tension.

Keep body parts well away from

idler when performing this

operation.

Figure 19

1. PTO Actuator Cable

2. Deck Spindle

3. Engine Drive Pulley

4. Deck Idler

5. PTO Belt

3

4

1

5

2

2

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 56 57

Comments to this Manuals

No comments