Ariens 1332 Specifications download pdf (Page 16)

GB-16

2. Push the control levers all the way forward to release

the brakes.

3. Push unit to desired location.

IMPORTANT: Towing the unit will damage the transmission.

TO TRANSPORT UNIT

ALWAYS shut off engine, remove key and drain fuel when

transporting unit on a truck or trailer. Use extra care when

loading or unloading unit.

On pistol grip models, lock both steering lever latches in

neutral to engage the brakes.

On pro-steer models, put the control levers in neutral to

engage the brakes and then the lock pivot bar against

control levers.

Secure unit chassis to transport vehicle. NEVER secure

from rods or linkages that could be damaged.

DO NOT transport machine while engine is running.

* Change oil after first 8 hours of operation and every 100

hours thereafter.

MAINTENANCE SCHEDULE

Period Service Task

Each Use

Check Safety Interlock System WARNING:

Safety interlock system failure and improper operation of unit

can result in death or serious injury. Test this system each time the unit is

operated. If this system does not function as described, do not operate until

repairs are made. See Check Safety Interlock System on page 10.

Check Air Cleaner Check the air cleaner element before each use. See engine manual for

detailed instructions.

Check Engine Oil Check the engine oil level before each use. Never operate the engine when

the oil level is low. See engine manual for detailed instructions.

Check Engine Cooling Check the engine air cooling system before each use. See engine manual for

detailed instructions.

Check Fasteners Check all nuts, bolts, and other fasteners before each use. Replace missing

or damaged fasteners.

Check Tire Pressure Check tires for proper inflation, excessive wear or damage before each use.

The correct air pressure is 8 to 16 psi (55 to 110 kPa).

Follow Engine Manual

Maintenance Schedule

Perform scheduled engine maintenance. See engine manual for detailed

instructions.

Check Battery Keep battery and its terminals clean. See Battery (988104) on page 20.

Every 25

Hours

Check All Belts Check all belts for wear or damage. If belts slip, check for damaged belt

tensioner.

Mower Blades Check mower blades for wear. Sharpen or replace as needed. See Mower

Blades on page 22.

Clean Air Cleaner Foam

Element

See engine manual for detailed instructions.

Every 50

Hours

General Lubrication Oil all pivot points and pin connections. Grease lube fittings. See General

Lubrication on page 17.

Every 100

Hours

Change Engine Oil

Open the petcock to drain oil through oil drain hole on the left side of engine.

See engine manual for additional instructions.

Check Fuel Filter See engine manual for detailed instructions.

Check Spark Plug See engine manual for detailed instructions.

Check Muffler Check muffler for damage or wear. Replace if necessary.

Clean Air Cleaner Paper

Element

See engine manual for detailed instructions.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Comments to this Manuals

No comments

Ariens 1332 Specifications Page 16

Comments to this Manuals

Related products and manuals for Lawnmowers Ariens 1332