Ariens Lawn Tractor 20/42 Specifications

Owner/Operator & Parts ManualModel815022ZT XL and Zoom XL Bagger03374600A 7/08Printed in USA

GB – 10Install Counterweights1. Remove mounting hardware from footrest (figure 4). NOTE: The hex bolt and washers will be reused when installing the b

GB – 11INSTALL SHEAVE AND SHEAVE ADAPTER (FIGURE 6 AND 7) 1. Remove the wing knobs and discharge chute from unit. Save wing knobs to install the blowe

GB – 12INSTALL BLOWER ASSEMBLYInstall Bagger Mounting Bracket and Bagger Baffle, and Blower Assembly1. Install the blower bracket (item 42) to blower

GB – 13INSTALL V-BELT AND BELT COVERInstall V-Belt (Figure 9)NOTE: Three V-belts (item 20) are supplied with the bagger kit:• 42-inch mower decks use

GB – 14Install Belt Cover – 48- and 54-Inch Decks1. Install the 5/16” x 2-3/4” standoff (item 19) on mower deck with a 5/16” nylon locknut (item 39).2

GB – 154. Install the cover assembly on the rear bagger mount by placing the shaft on the cover assembly in the slots on the mounting bracket. Rotate

GB – 16INSTALL MESH BAGS (FIGURE 16)1. Install mesh bags (item 24) on cover assembly (item 10) with the heat resistant (smooth side) side of the bags

GB – 171. Flip up thumb latch and remove bagger hose from cover assembly and blower and idler assembly (see figure 18 on page 17).2. Remove mesh bags

GB – 18BEFORE EACH USE1. Check bagger parts for wear, deterioration, or damage. Replace ONLY with Ariens/Gravely original service parts before operati

GB – 19EMPTYING MESH BAGSIf bagger stops picking up grass clippings, the mesh bags may be full.To empty mesh bags:1. Disengage PTO, stop engine, and r

GB – 2Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . .

GB – 204. Install hose and ensure the hose is securely held in place by the thumb latch.OPERATING TIPS• Cut grass when it is dry.• Cut grass in two pa

GB – 21SPECIFICATIONSModel Number 815022Description ZT XL and Zoom XL BaggerSerial Number 000101 and upAdded Length to Unit – Front 6-3/8in. (16.2 cm)

GB – 22SAFETY DECALSItem Part No. Qty. Description1 05359700 1 Bagger Cover Decal2 07731400 1 Mower Pan Danger Decal3 07742300 1 Warning Decal4 0808

GB – 23BLOWER ASSEMBLY TO MOWER DECK (48-, 54-INCH MOWER DECKS)21356378911102313121314315216181415417

GB – 24BLOWER ASSEMBLY TO MOWER DECK (48-, 54-INCH MOWER DECKS) (CONT.)Item Part No. Qty. Description1 51514700 1 Housing, Blower2 07531700 3 Knob,

GB – 25BLOWER ASSEMBLY TO MOWER DECK (42-INCH MOWER DECKS)3124956728210331111122122131514132161718

GB – 26BLOWER ASSEMBLY TO MOWER DECK (42-INCH MOWER DECKS) (CONT.)Item Part No. Qty. Description1 51514700 1 Housing, Blower2 06439300 5 Washer, Fla

GB – 27BLOWER ASSEMBLYOEe00613456712106111213109821214161718151811109210 193520214222325262723282630293432312424338

GB – 28BLOWER ASSEMBLY (CONT.)Item Part No. Qty. Description1 51514700 1 Housing, Blower2 05900008 2 Bolt, Hex .25-20 x .50 Epoxy3 00169951 1 Plate,

GB – 29BAGGER COVER ASSEMBLY1112131852313161224952021222612332935678119101714153552528314273028302929263223343435353636373738394040

GB – 3NOTE: To locate your nearest Ariens Dealer, go to www.ariens.com on the internet. To locate your nearest Gravely Dealer, go to www.gravely.com o

GB – 30BAGGER COVER ASSEMBLY (CONT.)Item Part No. Qty. Description1 06802500 11 Rivet, Pop .187 x .4022 61556800 1 Cover, Bagger with Decal 3 068076

GB – 31COUNTERWEIGHT ASSEMBLYItem Part No. Qty. Description1 05962200 2 Bolt, Hex .50-13 x 5.00 Grade 52 00172000 2 Counterweight3 06215700 1 Bolt,

ARIENS COMPANYGRAVELY® | STENS® | LOCKE® | NATIONAL® | BYNORM® | EVERRIDE® | GREAT DANE® Con_Ride_200832 Two-Year Limited Lawn and Garden Consumer R

ARIENS COMPANYGRAVELY® | STENS® | LOCKE® | NATIONAL® | BYNORM® | EVERRIDE® | GREAT DANE® Con_Ride_200833 Exceptions and Limitations• Batteries are w

Ariens CompanyGravely 655 West Ryan StreetBrillion, WI 54110-1072920-756-2141Fax 920-756-2407www.ariens.com or www.gravely.com

GB – 43. WARNING!4. DANGER!5. HOT SURFACESSAFETY RULESDo not operate on slopes over 10°. Installing the blower assembly on your mower requires the rem

GB – 5Always be aware of maximum sweep of bagger when turning. Always allow adequate clearance between bagger, personnel and other objects when turnin

GB – 6Dust, smoke, fog, etc. can reduce vision and cause an accident. Mow only in daylight or good artificial light.Avoid slippery surfaces. Always be

GB – 7Reverse connections may result in sparks which can cause serious injury. Always connect positive (+) lead of charger to positive (+) terminal, a

GB – 8UNPACKING UNITIMPORTANT: Remove contents from carton carefully. Place cover assembly on a flat piece of cardboard to avoid scratching it.Package

GB – 9OEe009 Figure 313304548-, 54-Inch Decks252624102542-Inch Decks6789111213141517161819192021222823272936373132333435363839404142