Ariens 1332 Specifications download pdf (Page 22)

GB-22

NOTE: Make sure the wing knobs do not interfere with cut-

ting height adjustments.

44"AND 48" BELT REPLACEMENT

Mower Drive Belt

1. Stop engine, remove key and wait for all hot parts to

cool.

2. Set deck to the fourth cutting height.

3. Remove deck cover.

4. Remove mower drive belt idler spring (Figure 17).

5. Remove mower drive belt from deck sheaves and

mower clutch sheave.

6. Install new mower drive belt on deck sheaves and

mower clutch sheave.

7. Replace mower drive belt idler spring to tension belt.

8. Replace deck cover and secure.

NOTE: Make sure wing knobs do not interfere with cutting

height adjustments.

Deck Belt

NOTE: Mower drive belt must be removed before removing

the deck belt.

1. Stop engine, remove key and wait for all hot parts to

cool.

2. Remove the deck belt idler spring from the spring

anchor.

3. Remove deck belt from deck sheaves.

4. Install new deck belt.

5. Replace deck idler spring to tension belt.

6. Replace mower drive belt.

7. Replace deck cover.

MOWER BLADES

NOTE: If mower is used under sandy soil conditions, replace

blades when air lifts become eroded through at ends

(Figure 18).

Remove Mower Blades

1. Turn the engine off. Remove the ignition key. Remove

the ignition wire from the spark plugs.

2. Remove the bolts, lock washer, flat washers, and

blades from the spindle shafts.

Replace Mower Blades

1. Put the blades, flat washers, lock washers, and the

bolts back on the spindle shafts.

2. Tighten the bolts to a torque of 115-125 lbf-ft

(156-169.5 N•m).

3. Replace ignition wire on spark plugs.

Figure 17

OG1395

1. Mower Drive Belt

Idler Spring

2. Mower Drive Belt

Idler

3. Mower Drive Belt

4. Deck Belt

5. Deck Sheave

6. Mower Clutch

Sheave

7. Deck Belt Idler Spring

8. Deck Belt Idler

CAUTION: Use sturdy gloves or padding to

protect hands when working with mower

blades.

1. Cutting Edge

2. Air Lift Erosion

OT0792

Figure 18

DO NOT sharpen to this pattern

Sharpen to this pattern

DISCARD if more

than 1/2 in. (1.27 cm)

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

Ariens 1332 Specifications Page 22

Comments to this Manuals

Related products and manuals for Lawnmowers Ariens 1332