Ariens 1332 Specifications download pdf (Page 11)

GB - 11

Control Levers (988114, 115, 118, 119, 313)

The control levers are used to steer, operate in forward and

reverse, and stop the unit. Push forward to move forward.

Shift into reverse and pull up on the lower control levers to

move in reverse. When held in neutral, the brakes are

engaged.

Ignition Switch (988104)

Operate the ignition switch with the removable

key. The switch has three positions: Off (1), On

(2) and Start (3). To start the engine, turn the

key to Start, then release to On. To stop the

engine, turn the key to Off.

Ignition Switch (988100, 101, 102, 103, 110, 112,

114, 115, 118, 119, 313)

Operate the ignition switch with the removable

key. The switch uses two positions: Off (1) and

On (2). To start the engine, turn the key to On

(2) and pull the recoil handle. To stop the

engine, turn the key to Off (1).

Throttle Lever

(988101, 102, 103, 104, 112, 115, 119)

The throttle lever changes the speed of the

engine. Move the throttle lever to Fast (1) to

increase engine speed. Move the lever to Slow

(2) to decrease engine speed.

Throttle/Choke Lever (988100, 110, 114, 118, 313)

The Throttle/Choke lever changes the speed of

the engine and chokes the engine for cold starts.

Place the lever in Choke (1) to start a cold engine.

Move the lever to Fast (2) to increase engine

speed. Move the lever to Slow (3) to decrease

engine speed.

Choke Control

(988101, 102, 103, 104, 112, 115, 119)

Use the choke control to start a cold engine. Pull

the control out to choke the engine. Push the

control in when the engine gets warm.

Shift Lever

The shift lever sets the direction and speed of the unit.

R = reverse

N = neutral

1 = the slowest forward speed

5 = the fastest forward speed.

PTO Clutch (988100, 101, 102, 103, 104, 110, 112)

Pull the PTO (power take off) switch On (1) to

engage the mower blades. Push the PTO

switch Off (2) to disengage the mower

blades.

PTO Clutch (988114, 115, 118, 119, 313)

Pull the PTO (power take off) switch past On (1) to Reset (2)

to engage the mower blades. Push the PTO switch Off (3) to

disengage the mower blades.

NOTE: Pull PTO switch to Reset (2) to engage mower

blades after operator presence control has been released.

Parking Brake (988114, 115, 118, 119, 313)

The pivot bar can hold the tractor in

position when not in use.

To engage brake, loosen pivot bar

(1).

Pull pivot bar back against the

steering levers and lock in position

(2).

WARNING: AVOID INJURY. When the engine is

running and the shift lever is engaged, moving

only one lever causes the unit to circle around

one drive wheel.

ALWAYS move levers slowly.

OF1210

OF1212

OG1180

OG1061

OG1190

OG1040

OE0260

OE0261

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Comments to this Manuals

No comments

Ariens 1332 Specifications Page 11

Comments to this Manuals

Related products and manuals for Lawnmowers Ariens 1332