Ariens 924 SNO-THRO 924112 Service Manual download pdf (Page 32)

9 - 32

Figure 27

9.4 DISCHARGE CHUTE

Install Discharge Chute-Electric Rotation (924517)

1. Remove chute motor cover (Figure 29).

2. Remove the six nuts from ring gear (Figure 28).

3. Remove two half rings.

4. Position discharge chute over threaded studs with

the chute opening facing the electric motor.

5. Replace the half rings.

6. Replace the six nuts and tighten to 120 lbf-in.

(13.56 Nm) torque.

7. Replace chute motor cover.

Figure 28

1. Idler Pulley

2. Rake Shaft Bushing

3. Shear Bolt

4. Ball Bearing

5. Bearing Flange

PS1091

WARNING: DO NOT put hands or feet near

or under rotating parts. Keep clear of

discharge opening at all times.

WARNING: NEVER direct discharge of

material toward bystanders nor allow anyone

in front of equipment while unit is in operation.

Be familiar with area of operation.

1. Ring Gear Nuts

2. Half Rings

3. Discharge

Chute

OS1930

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 42 43

No comments

Ariens 924 SNO-THRO 924112 Service Manual Page 32