Ariens 924 SNO-THRO 924112 Service Manual download pdf (Page 23)

5 - 23

5.1 HANDLE BARS

The handle bars are held in place to the lower handle

bars with four bolts and wing knobs.(Figure 18) For

service put the unit in service position up on the auger

housing.

To service:

1. Check all fasteners

2. All levers and pivot points should operate freely

3. All bushings and guide holes should not be

excessively sloppy

Figure 18

5.2 CONTROLS

Check Function of Dual Handle Interlock

Without the engine running, press down (engage) both

clutch levers Figure 18. Release attachment clutch

lever. Attachment clutch should remain engaged until

traction clutch lever is released, then both clutches

must disengage. If they do not, contact your dealer for

repairs.

The controls operate a rod or a cable.

The functions are:

Remote Chute Deflector

Auger

Traction

Speed

All of the movement and pivot points must operate

freely.

To service:

1. Check all fasteners.

2. All bushings and guide holes should not be

excessively sloppy.

3. Cables and springs should be clean.

SECTION 5 - HANDLEBARS & CONTROLS

PS0814

1. Wing Knob

2. Attachment Clutch Lever

3. Spring Clip

4. Traction Drive Clutch

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 42 43

No comments

Ariens 924 SNO-THRO 924112 Service Manual Page 23