Ariens 921040 - Platinum 30 SHO Specifications download pdf (Page 10)

EN - 10

Unfold Lower Handlebar

(Figure 4)

IMPORTANT: Be sure to block wheels or

secure unit so it does not move during

assembly.

1. Rotate lower handlebar out from unit so

lower handlebar mounting holes align

with mounting holes on the unit frame.

(Figure 4).

.

2. Secure lower handlebar to unit using two

3/8 x 3/4" hex head serrated flange

grade 5 bolts (Figure 3, Item 2).

3. Tighten all four bolts to 25 – 42 lbf-ft

(33.9 – 56.9 N•m).

Attach Upper Handlebar Assembly

(Figures 5 and 6)

1. Attach upper handlebar assembly to

lower handlebar using two sets of the

handlebar hardware. One set to attach

each side of the handlebars. (Figure 5).

NOTICE: DO NOT tighten hardware. Allow

upper handlebar assembly to hang from the

lower handlebars for the next step. (Figure 5).

.

2. Hook spring end of attachment control

cable to the clutch arm.

3. Hook spring end of the traction control

cable to the cable eyelet on back of

frame.

.

Figure 4

1

1. Lower Handlebar

2. Mounting Hole

2

(Right Wheel Not Shown)

Figure 5

3

4

2

1. Upper Handlebar Assembly

2. Lower Handlebar

3. 5/16 x 2-1/4" Round Head Square

Neck Grade 5 Bolt

4. Handlebar Spacer

5. 5/16" Nyloc Flange Nut

1

5

Figure 6

3

1. Clutch Arm

2. Cable Eyelet

3. Attachment Control Cable

4. Traction Control Cable

1

4

2

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 39 40

Comments to this Manuals

No comments