Ariens 921003 - ST1130DLE Specifications download pdf (Page 33)

GB - 33

5. Check adjustment. See Attachment

Clutch/Brake Adjustment on page 27

6. Reconnect chute crank and secure with

spring clip. Reconnect chute lock cable

and deflector cable.

7. Replace belt cover.

Traction Drive Belt Replacement

NOTE: Replacement will be easier with

housing and frame tipped apart and bottom

cover off.

1. Remove attachment drive belts (see

Attachment Drive Belt Replacement on

page 32).

2. To gain belt clearance, remove swing

gate spacer and slide drive plate over so

that finger clears stop hole in frame and

can swing past it. See Figure 46.

3. Pull idler away from traction drive belt

and remove belt from idler pulley, engine

sheave and driven pulley (it may be

necessary to turn engine pulley using

recoil handle).

4. Install new traction drive belt onto

attachment pulley and engine sheaves.

5. Swing drive plate toward friction disc

until finger lines up with stop hole in

frame. Slide drive plate over, inserting

finger into stop hole. Reinstall drive plate

spacer.

NOTE: Make sure the drive plate assembly

return spring remains connected to the frame

and nylon bushing is in drive plate pivot hole.

6. Replace attachment drive belt (See

Attachment Drive Belt Replacement on

page 32).

WARNING: AUGER /

IMPELLER MUST STOP within

5 seconds when attachment

clutch lever is released or unit

damage or serious injury may

result.

Figure 45

OS7198

1. Traction

Drive Belt

2. Engine

Sheave

3. Attachment

Drive Belts

4. Belt Finger

5. Attachment

Belt Idler

6. Attachment

Idler

Adjustment

Nut

7. Traction Belt

Idler

2

1

3

4

5

6

7

Figure 46

OS7144

1. Spacer

2. Drive Plate

Assembly

3. Traction Belt

Idler

4. Attachment

Drive Belts

5. Traction Drive

Belt

6. Engine

Sheave

7. Friction Disc

2

3

5

6

1

7

4

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 39 40

Comments to this Manuals

No comments