Ariens Pro-24 Brush Cutter Specifications download pdf (Page 6)

GB - 6

DO NOT mow wet grass.

ALWAYS be sure of your footing. Keep a firm

hold on handlebar. Walk, NEVER run.

Engine/blade control feature on mower stops

engine and blade within 3 seconds whenever

operator releases handlebar control. Check

this feature frequently. If feature fails to

operate, disconnect spark plug wire and

adjust or have it repaired before using unit.

Only trained adults may operate or service

unit. Training includes actual operation. The

owner is responsible for training users.

NEVER operate after or during the use of

medication, drugs or alcohol. Unit requires

complete and unimpaired attention.

NEVER allow children to use or service

mower.

ALWAYS keep hands and feet away from

rotating parts. Rotating parts can cut off body

parts.

ALWAYS keep hands away from pinch points.

Fumes from engine exhaust can cause death

or serious injury. DO NOT run engine in an

enclosed area.

ALWAYS protect eyes, face, and body with

adequate safety gear and protective clothes.

Wear sturdy footwear, gloves, a hard hat and

safety goggles or safety glasses with side

shields while operating mower.

Wear appropriate hearing protection.

NEVER operate mower barefoot or when

wearing open sandals or canvas shoes.

NEVER wear loose clothes, long hair or

jewelry that may get caught in rotating parts.

ALWAYS stand clear of discharge when

operating unit.

NEVER direct discharge toward bystanders.

Operator is responsible for bystander safety.

DO NOT touch hot parts. Allow parts to cool.

Keep safety devices or guards in place and

functioning properly. NEVER modify or

remove safety devices.

Read, understand, and follow all instructions

in the manual and on the machine before

starting. Understand:

• How to operate all controls

• The functions of all controls

• How to STOP in an emergency.

DO NOT attempt to start your engine until

you know what the controls do and how they

work.

DO NOT tilt mower when starting it.

Keep feet away when starting engine.

Never leave a running unit unattended.

Take all possible precautions when leaving

unit unattended.

ALWAYS shut off engine and disconnect

spark plug wire to prevent accidental starting

or unauthorized use.

Stop engine if anyone enters the work area.

NEVER attempt to make any adjustments to

unit while engine is running (except where

specifically recommended). Stop engine,

remove key and wait for all moving parts to

stop before servicing.

DO NOT make cutting height wheel

adjustments while the engine is running.

If you strike an object, or if equipment

vibrates abnormally, stop engine at once, wait

for moving parts to stop and disconnect wire

from spark plug. Repair any damage before

restarting unit.

ALWAYS shut off engine, allow blade to stop

and disconnect spark plug wire before

clearing clogs or cleaning unit.

Check for wear, damage, and/or

deterioration. Replace only with Ariens

original equipment replacement parts for

safety.

To reduce fire hazard and overheating, keep

equipment free of grass, leaves, debris or

excessive lubricants.

Use extra care when approaching blind

corners, shrubs, trees, or other objects which

may obscure vision.

DO NOT mow at too fast a rate. DO NOT

change engine governor setting or over-

speed the engine.

Do not operate mower on gravel or loose

material such as sand. Stop mower when

crossing drives, walks, or roads to prevent

damage or injury from thrown objects.

DO NOT pull mower backwards unless

absolutely necessary. Look down and back,

especially for small children, before and while

moving backwards.

On self-propelled models, releasing wheel

drive control must stop mower’s forward

movement. If this feature fails to operate,

disconnect spark plug wire and repair before

using unit.

On self-propelled models, wheel drive must

be disengaged when starting engine.

DO NOT operate on steep slopes.

NEVER leave unit unattended on a slope.

Chock wheels if parking on a slope.

Mow across the face of slopes, never up and

down. Be especially cautious when changing

direction on slopes. Maximum slope angle of

operation is 25º.

1 2 3 4 5 6 7 8 9 10 11 ... 35 36

Comments to this Manuals

No comments

Ariens Pro-24 Brush Cutter Specifications Page 6

Comments to this Manuals

Related products and manuals for Lawnmowers Ariens Pro-24 Brush Cutter