Ariens 992807-ProZoom 60 Specifications download pdf (Page 16)

WARNING:AVOIDINJURY!

_L, Readandunderstandentire

Safety Section before

proceeding.

CONTROLS AND FEATURES

See figure 8 on page 15 for Controls and

Features locations.

Safety Interlock System

A

WARNING: Safety interlock

system failure and improper

operation of unit can result in

death or serious injury. Test this

system each time the unit is

operated. If this system does not

function as described, do not

operate unit repairs are made.

Perform the following tests to ensure the

safety interlock system is working properly. If

the unit does not perform as stated, contact

your Dealer for repairs.

1. Try to start the power unit when the

operator is in the seat, the mower PTO

is off, and the left hand steering control

lever is not in the park position. Try to

start the power unit after switching the

RH arm out of the park position and

putting the LH steering control lever into

the park position. Try starting the power

unit after taking both levers out of the

park position. The starter must not crank

in any of these instances.

2. Try to start the power unit when the

operator is in the seat, the mower PTO

is on, and the steering control levers are

in the park position. The starter must not

crank in this situation.

3. Try to start the power unit when the

operator is not in the seat and the

steering control levers are in the park

position. The starter must not crank in

this situation.

Checking the Engine Shut-Off

Circuits

Check the engine shut-off circuits daily.

1. Run engine at 1/3 throttle, engage the

mower PTO and lift off of the seat. The

engine should stop within 3 seconds.

2. Run engine at 1/3 throttle, engage the

mower PTO, move a steering control

lever out of the neutral lock and lift off of

the seat. The engine should again stop

within 3 seconds. Repeat for the

opposite steering control lever.

NOTE: If the machine does not pass this test,

DO NOT OPERATE. Take it to your Ariens

Dealer.

3. Move the steering lever rearward and

release the steering lever. This steering

lever should return to a position where

the steering lever can be swung outward

and lock in the neutral outward position.

Steering Control Levers

The steering levers control the speed and

direction of the unit. In addition, they will stop

the unit.

After starting the power unit, pull the steering

control levers back together out of the lock

)osition and into the neutral position.

A

Figure 9

A. For reverse travel, pull both steering

control levers backward.

B. For straight forward travel, push both

steering control levers forward.

C. To turn left, pull the left back or push

the right steering control lever forward

or a combination of both.

D. To turn right, pull the left back or push

the left steering control lever forward

or a combination of both.

,&

CAUTION: Use caution when

making turns. Slow the machine

down to a manageable speed

before making sharp turns. This

mower can spin very rapidly when

pushing forward on one lever and

pulling back on the other.

GB - 16

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 105 106

Comments to this Manuals

No comments