Ariens 911410-WAW 34 Specifications download pdf (Page 20)

BELT REPLACEMENT

WARNING: AVOID INJURY.

ALWAYS block wheels, engage

parking brake and know all jack

stands are strong, secure and will

hold weight of unit during

maintenance.

Wheel Drive Belts

1. Stop engine, remove key, wait for all

moving parts to stop and hot parts to

cool.

2. Raise and support the rear of the unit.

3. Remove the rear cover and disconnect

the neutral return springs from the spring

anchors.

Disconnect neutral return

springs from the spring anchors.

Figure 14

4. Remove the idler arm from the

transmission plate. See Figure 15.

5. Remove the forward drive belt from the

engine pulley and remove it from the

unit.

6. Remove the reverse drive belt from the

engine pulley and remove it from the

unit.

7. Route the new reverse belt through the

transmission idler arm and then install

belt on the engine pulley. See Figure 15.

8. Route the new forward belt through the

transmission idler arm and then install

belt on the engine pulley. See Figure 15.

9. Install the idler arms on the transmission

plate and install the belts on the

transmission pulleys. See Figure 15.

10. Replace the rear cover.

11. Start the unit and test operation of the

drive system. Adjust the wheel drive

controls, if needed.

NOTE: Check the wheel drive control

adjustment after the first 25 hours of use to

compensate for belt wear.

Rear of Unit - Forward Drive Belt Routing

I

I I

/

I I

Rear of Unit - Reverse Drive Belt Routing

1

1. Engine 3. Reverse

Pulley Drive Belt

2. Idler Arm 4. Forward

Drive Belt

Figure 15

GB - 20

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 61 62

Comments to this Manuals

No comments