Ariens 911410-WAW 34 Specifications download pdf (Page 10)

ASSEMBLY

1. Remove all packing materials and straps

from unit.

2. Remove one pair of nuts and bolts from

the handlebars.

3. Rotate the handlebar into the operating

position and connect the two braces to

the handlebars.

4. Replace the nuts removed in step 1 and

then tighten all four nuts.

1. Handlebar Folded Down

2. Nut

3. Brace

Figure 4

5. Check engine crankcase oil level. See

engine manual.

6. Connect the battery ground cable (-) to

the negative battery terminal.

7. Fill fuel tank. See FILLING THE FUEL

TANKon page 14.

NOTE: After the first twenty-five hours of

operation, belt wear may require the PTO

clutch cable and the drive control cables to be

adjusted. See Forward/Reverse Drive

Controls on page 19 and Wheel Drive Belts

on page 20.

IMPORTANT: Do not operate the unit without

understanding how the controls work and

how to safely start, stop and operate the unit.

2

1. Battery Cover

2. Negative (-) Battery Cable

Figure 5

GB - 10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 61 62

Comments to this Manuals

No comments