Ariens 22-Ton Log Splitter Specifications download pdf (Page 14)

GB - 14

Rear Stabilizer

(Figure 15)

Rear stabilizer must be positioned down and

locked in place when operating in the

horizontal position.

1. Remove hair pin from upper lock pin and

slide lock pin out from brackets.

2. Rotate rear stabilizer down until holes in

stabilizer align with holes in brackets.

3. Insert lock pin all the way through

brackets and stabilizer.

4. Reinstall hair pin.

IMPORTANT: Rear stabilizer must be locked

in the transport position before towing unit or

before placing beam in vertical operating

position.

OPERATION

Add Fuel to Fuel Tank

1. ALWAYS place unit in open or well-

ventilated area.

2. Stop engine and allow to cool.

3. Clean fuel cap and surrounding area to

prevent dirt from entering fuel tank.

4. Remove cap.

IMPORTANT: DO NOT use gasohol or

gasoline containing alcohol. See Engine

Manual for correct type and grade of fuel.

5. Fill fuel tank to within 1/2 in. (1.2 cm) of

bottom of filler neck with unleaded

gasoline.

NOTE: Tank capacity is .9 gallon (3.4 liters).

6. Replace fuel cap and tighten.

7. ALWAYS clean up any spilled fuel.

Start Engine

1. Make sure control lever is in neutral

position.

2. Move the engine switch to the ON

position.

3. Open the fuel shut off valve.

Figure 14

917002

Pull out lock

handle and rotate

jack stand up or

down.

Height-

Adjustment

Handle

Release handle

to lock in place.

Figure 15

Remove hair

pin and slide

lock pin out.

Insert lock pin

through

brackets and

insert hair pin.

Transport

Position

Work

Position

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Comments to this Manuals

No comments