Ariens 22-Ton Log Splitter Specifications download pdf (Page 8)

GB - 8

Position logs against end plate grips before

operating hydraulic cylinder.

Split logs end to end in the direction of the

grain, not against the grain.

Keep fingers and hands away from cracks in

logs while splitting. These can quickly close

and pinch or crush body parts.

On logs that are not square place the longest

portion of the log closest to the beam and the

most square end against the splitter wedge.

Use only your hand to operate the control

lever.

Tools Required:

• Two 3/4" wrenches or sockets.

• Thin-nosed pliers.

Unpack Unit

Remove unit and all other components from

the shipping container and move onto a level

surface.

Assemble Tongue Assembly

1. Ensure that jack stand is down and in

locked position.

2. Remove rear hex bolt and nut from

frame and retain (see figure 4).

3. Remove front hex bolt and nut retaining

tongue assembly to frame and retain.

4. Position tongue assembly in operating

position on frame.

5. Insert hex bolts through tongue

assembly and frame (see figure 5).

6. Secure hex bolts with hex nuts.

7. Tighten all hardware.

ASSEMBLY

WARNING: AVOID INJURY.

Read and understand the entire

Safety section before proceeding.

CAUTION: DO NOT start engine

until all assembly steps have

been completed.

Figure 4

Remove and

retain hex bolts

and nuts.

Safety

Chain

Tongue

Assembly

Jack

Stand

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Comments to this Manuals

No comments