Ariens 991040 - Zoom 2660 HD User Manual download pdf (Page 28)

GB - 28

Adjust Blade Height

Level and pitch the mower with the height

adjusters on each deck lift bracket

(Figure 24).

Loosen the jam nut on the deck lift

bracket bolt about 1/4 turn to reduce

clamp load on the height adjusters.

Loosen the jam nut on the deck adjuster

bolt and then turn the bolt clockwise to

raise the deck or counterclockwise to

lower the deck. Tighten both jam nuts.

SHORT TERM

NEVER spray unit with high-pressure water

or store unit outdoors.

Inspect unit for visible signs of wear,

breakage or damage.

Keep all nuts, bolts and screws properly

tightened and know unit is in safe working

condition.

Store unit in a cool, dry protected area.

LONG TERM

Clean unit thoroughly with mild soap and low

pressure water and lubricate (See Lubricate

Unit on page 22 in Maintenance). Touch up

all scratched painted surfaces.

Remove weight from wheels by putting

blocks under frame or axle.

Figure 23

Blade Side-to-Side Level

Blade Front-to-Back Pitch

Front

Left

Rear

Rear

Right

STORAGE

WARNING: AVOID INJURY.

Read and understand entire

Safety section before proceeding.

Figure 24

DO NOT place blocks under

reinforcement bar.

Height

Adjusters

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34

Comments to this Manuals

No comments