Ariens 916003 - AMP 24 Specifications download pdf (Page 6)

GB - 6

DO NOT operate near drop-offs, ditches, or

embankments. Unit can suddenly turn over if

a wheel is over the edge of a cliff or ditch, or if

an edge caves in.

Falling snow, fog, etc. can reduce vision and

cause an accident. Operate unit only when

there is good visibility and light.

NEVER operate unit after or during the use of

medication, drugs or alcohol. Safe operation

requires your complete and unimpaired

attention at all times.

NEVER allow anyone to operate this unit

when their alertness or coordination is

impaired.

DO NOT operate unit without wearing

adequate winter outer garments. Wear

adequate safety gear, including safety

glasses with side shields, and protective

gloves. Wear proper footwear to improve

footing on slippery surfaces.

DO NOT wear loose clothing or jewelry and

tie back hair that may get caught in rotating

parts.

Protect eyes, face and head from objects that

may be thrown from unit. Wear appropriate

hearing protection.

Avoid sharp edges. Sharp edges can cut.

Moving parts can cut off fingers or a hand.

ALWAYS keep hands and feet away from all

rotating parts during operation. Rotating parts

can cut off body parts.

NEVER place your hands or any part of your

body or clothing inside or near any moving

part while unit is running.

ALWAYS keep hands away from all pinch

points.

DO NOT touch unit parts which might be hot

from operation. Allow parts to cool before

attempting to maintain, adjust or service.

Never direct discharge towards persons or

property that may be injured or damaged by

thrown objects. Use extreme caution on

gravel surfaces. Stay alert for hidden hazards

or traffic. Adjust skid shoes so Scraper Blade

does not contact gravel.

DO NOT throw snow any higher than

necessary.

Deflected materials can cause injury and

property damage.

Always stand clear of the discharge area

when operating this unit.

ALWAYS disengage attachment, stop unit,

allow moving parts to stop and remove key

before leaving operator’s position.

ROTATING IMPELLER CAN CAUSE

SERIOUS INJURY. NEVER ATTEMPT TO

UNCLOG OR CLEAN UNIT WHILE AUGER

IS RUNNING.

Read, understand, and follow all instructions

in the manual and on the machine before

starting.

Understand:

• How to operate all controls.

• The functions of all controls.

• How to STOP in an emergency.

ALWAYS allow unit to adjust to outdoor

temperatures before clearing snow.

Always be sure of your footing, especially

when operating in reverse or leaving the

operator’s position. Walk, never run during

operation.

DO NOT overload the machine capacity by

attempting to operate or to clear snow at too

fast a rate.

Slow down and turn corners slowly.

Do not operate in reverse unless absolutely

necessary. ALWAYS back up slowly. Always

look down and behind before and while

backing.

Disengage attachment drive when traveling

from one work area to another.

Abnormal vibrations are a warning of trouble.

Striking a foreign object can damage unit.

Immediately stop unit. Remove key and wait

for all moving parts to stop. Disconnect

batteries. Inspect unit and make any

necessary repairs before restart.

Before cleaning, removing clogs or making

any inspections, repairs, etc.: disengage

clutch(es), stop unit, remove key, allow

moving parts to stop. Allow hot parts to cool.

Run auger a few minutes after clearing snow

to prevent freeze-up.

Disengage attachment when not in use.

Adjust skid shoes to clear gravel or crushed

rock surfaces safely.

Never leave a unit unattended with key in.

ALWAYS disengage attachment and remove

key to prevent unauthorized use.

Never carry passengers.

Check clutch and brake operation frequently.

Adjust and service as required. All motion of

drive wheels and auger/impeller must stop

quickly when control levers are released.

1 2 3 4 5 6 7 8 9 10 11 ... 35 36

Comments to this Manuals

No comments

Ariens 916003 - AMP 24 Specifications Page 6

Comments to this Manuals

Related products and manuals for Snow throwers Ariens 916003 - AMP 24