Ariens 991073-Max Zoom 48 Specifications download pdf (Page 15)

GB - 15

STARTING AND SHUT OFF

To start the engine:

1. Make sure the steering levers are in

neutral.

2. Put the PTO switch in the “Off” position.

3. Engage parking brake.

4. If the engine is cold, move the choke

control to the “On” position. If the engine

is warm or hot, do not use choke.

5. Move the throttle to 3/4 “Fast” position.

See Engine Manual for detailed

instructions.

6. Put the ignition key in the switch and

turn it to the “Start” position.

7. As soon as the engine starts, release the

key.

8. Move the choke control to the “Off”

position from the “Choke” position. Wait

until the engine is running smoothly

before operation.

To stop the engine:

1. Bring the steering levers to neutral.

Disengage the PTO and engage the

parking brake.

2. Move the throttle lever to the “Slow”

position.

3. Turn the ignition key to the “Off” position.

TO MOW WITH UNIT

Operate the unit only when seated in the

operator’s position.

1. Start the engine. Let the engine warm

until it is running smoothly.

2. Release parking brake.

3. Bring the steering levers to neutral.

4. Slow the engine down to about 3/4

speed.

5. Turn ON the PTO switch to engage the

mower.

IMPORTANT: Never engage the PTO if the

mower is plugged with grass or other

material. This may cause damage to the

electric clutch.

6. Move throttle control to fast.

7. Move the steering levers forward to

obtain a slow ground speed.

8. To disengage the mower, move the PTO

switch to the “Off” position.

9. When you know how to operate the unit,

select a speed appropriate to your

mowing conditions.

PARKING

To park the unit:

1. Bring the steering levers to neutral. Turn

off PTO.

2. Move the throttle lever to the “Slow”

position.

3. Engage the parking brake.

4. Lower the attachment.

5. Turn the ignition key to the “Off” position

and remove the key.

MOVING THE UNIT WITH THE

ENGINE OFF

IMPORTANT: Never tow unit.

1. Shut OFF engine.

2. Place seat in the service position (See

Service Position on page 18).

3. Pull the right and left bypass levers to

the neutral position.

4. Disengage parking brake.

5. Push unit to desired location.

6. Engage parking brake.

7. Push the right and left bypass levers to

the drive position.

CAUTION: Read entire

Owner/Operator Manual, Clutch

Manual, and Engine Manual first.

DO NOT attempt to start engine

at this time.

WARNING: Move the steering

control levers slowly and keep the

throttle control lever at slow

speed until you learn how to

operate the unit.

WARNING: Do not bypass

transmission when on a slope.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 35 36

Comments to this Manuals

No comments