Ariens 991073-Max Zoom 48 Specifications download pdf (Page 16)

GB - 16

FOR BEST PERFORMANCE

Cut grass when it is dry.

Keep mower blades sharp.

Keep mower deck properly levelled.

Adjust anti-scalp rollers to prevent scalping.

Do not set height of cut too low. For very tall

grass, mow twice.

Do not travel too fast.

Mow with the engine set at full throttle.

When mulching, only remove 1/3 of grass

length per cutting. Do not cut more than

1 inch (2.54 cm) at any one time.

Discharge clippings into areas already cut.

Vary cutting pattern with each mowing.

Do not allow grass or debris to collect inside

of mower deck. Clean after each use.

Proper maintenance can prolong the life of

unit. The following charts show the

recommended service schedule. More

frequent service may be required due to

working conditions (heavy loads, high

ambient temperatures, dusty conditions, or

airborne debris).

See the maintenance instructions in the

Engine Manual for additional information.

OF4105

OF4110

Pull Lever Out to the Neutral Position

Figure 5

Push Lever In to Drive Position

MAINTENANCE SCHEDULE

WARNING: AVOID INJURY.

Read and understand entire

Safety section before proceeding.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

No comments

Ariens 991073-Max Zoom 48 Specifications Page 16