Ariens 991073-Max Zoom 48 Specifications download pdf (Page 18)

GB - 18

Ariens Dealers will provide any service which

may be required to keep your unit operating at

peak efficiency. Should engine service be

required, it can be obtained from a Ariens

Dealer or the engine manufacturer’s

authorized service center.

SERVICE POSITION

1. Place unit on a flat level surface.

ALWAYS stop engine. Ensure unit is

secure and will not tip over. Strap and

clamp onto lift if used.

2. Place steering levers in neutral and

engage parking brake.

3. Remove wing knob.

4. Tip seat forward (Figure 6).

5. When service is complete, lower seat

and secure with wing knob or hex nut.

Every

Hours

Check Air FIlter Check air filter for dirt. Clean as required. Follow

Engine Manual for maintenance schedule.

Lubricate Unit Oil all pivot points and pin connections. Grease

lube fittings. See Ariens does not recommend

jump-starting your unit. Jump-starting can damage

engine and electrical system components. See

your engine manual for more detailed information.

on page 22.

Check Brake Gap Adjust gap if necessary. See Adjusting the Parking

Brake on page 24.

Every

100

Hours

Clean Battery Keep battery and its terminals clean. See Clean

Battery on page 21

Check Fasteners Check mower blade mounting hardware and all

other fasteners. Replace missing or damaged

fasteners. Tighten all nuts and bolts to their correct

torque value.

Check Belts Replace worn or deteriorated belts. See Replacing

Mower Belts on page 25 and on page 26.

Every

400

Hours

Change Hydraulic Fluid

and Filter

Drain hydraulic fluid tank, replace hydraulic oil filter,

refill system. See Hydraulic Fluid on page 19.

*Change hydraulic fluid and filter after the first 75 hours of operation and then

every 400 hours.

Period Service Task

SERVICE AND ADJUSTMENTS

WARNING: AVOID INJURY.

Read and understand entire

Safety section before proceeding.

CAUTION: HOT SURFACES

may result in injury. DO NOT

touch engine or drive parts which

are hot from operation. Allow

parts to cool before servicing.

CAUTION: Be sure footing is

secure to accomodate weight

shift of seat when rotating it into

service position.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

Comments to this Manuals

No comments

Ariens 991073-Max Zoom 48 Specifications Page 18

Comments to this Manuals

Related products and manuals for Utility Vehicle Ariens 991073-Max Zoom 48