Ariens String Trimmer Specifications download pdf (Page 11)

GB - 11

Front Wheel Adjuster

Positions the front wheel on the axle to

balance the unit when working along curbs or

other uneven terrain.

NOTE: Make sure the front wheel rolls on the

work surface.

IMPORTANT: Make sure the cutting blade

will not contact wheel before starting the

engine.

1. With the engine shut off, remove the pin

from the axle and position the front

wheel on the right or left side of the axle

as needed, and secure in position with

the hair pin.

Position the wheel away from the blade

when bevel cutting or trimming.

Position the wheel nearer the blade for

edging.

Engine Controls

Throttle

Throttle controls engine speed.

1. Set the throttle to slow (turtle) to start the

unit and when traveling between work

areas.

2. Set the throttle to fast (rabbit) when

edging.

Choke

Controls the air-fuel mixture in the carburetor.

1.Close the choke when starting a

cold engine.

2.Once the engine starts and begins

to warm, open the choke for

operation.

NOTE: Do not choke a warm engine.

Fuel Shut Off

1. Push the lever down to close the fuel

shut off valve for transporting, servicing

or storing the unit.

2. Pull the lever up to open the fuel shut off

valve for operating the unit.

Engine Shut Off Switch

1. Set the engine shut off switch to the On

position to start and operate the engine.

2. Set the engine shut off switch to the Off

position to shut off a running engine.

Recoil Starter

Start the engine with the recoil starter.

Oil Fill/Dipstick

Check the engine oil level (Figure 10).

Pin

Figure 8

Bushings

Pin

Bushings

Position wheel away from the blade

for bevel cutting or trimming.

Position wheel nearer the blade

for edging.

Throttle

Figure 9

Choke

Fuel Shut Off

Engine Shut Off

Switch

Recoil Starter

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Comments to this Manuals

No comments