Ariens Lawn Tractor 20/42 Specifications download pdf (Page 11)

GB – 11

INSTALL SHEAVE AND SHEAVE ADAPTER

(FIGURE 6 AND 7)

1. Remove the wing knobs and discharge chute from

unit. Save wing knobs to install the blower bracket.

2. Remove mounting hardware and right belt cover

from mower deck (figure 6).

NOTE: Only remove the nut holding down the belt cover

and the loose washer. Keep the bolts in place on the

deck.

IMPORTANT: Keep the hex bolt for re-installation when

the bagger kit is removed.

NOTE: The washer is used for installing the sheave

(item 13) and sheave adapter (item 14) in step 4.

3. Remove hex bolt and washer from right mower

deck spindle (figure 7).

4. Install sheave adapter (item 14), sheave (item 13),

and washer on right mower deck spindle with 3/8” x

1-3/4” hex bolt (item 11).

WARNING: Keep discharge chute, wing knobs

and belt covers for re-installation when the

bagger kit is removed.

Figure 6

Right Belt

Cover

Washer

Nut

Do not remove these

nuts and bolts.

Wing Knobs

Discharge Chute

Washer

Right Mower

Deck Spindle

Figure 7

Save this hex bolt to run

the mower without the

bagger installed.

Washer

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 33 34

No comments

Ariens Lawn Tractor 20/42 Specifications Page 11