Ariens 927055 - RM1332 Specifications download pdf (Page 29)

9 - 29

9.1 REAR AXLE DISASSEMBLY

1. Remove wheel, hub cap, cotter pin, and retainer

from short axle and remove short axle.

2. Remove roll pin in long axle and remove long axle

along with washer on inside of axle.

3. Inspect all parts for wear or damage and replace

as necessary.

4. Assemble in reverse order.

9.2 GEAR CASE REMOVAL

1. Remove wheel, cotter pin, spindle cup and hub cap

from short axle and remove axle.

2. Drive roll pin out of long axle opposite gear case

and remove long axle along with washer inside of

axle bearing.

3. Remove cotter pin from brake rod and remove rod.

4. Remove three flange whizlock screws from seal

and remove seal.

5. Remove three cap screws holding gear case to

frame and remove gear case.

SECTION 9 - DRIVE TRAIN

Figure 29

1. Hub Cap

2. Spindle Cup

3. Sleeve Bushing

4. Zerk Fitting

5. Tube

6. Seal

7. Bearing Flange

8. Gear Case-Complete

9. Push Nut

10.Tube

11.Bearing Flange

12.Radial Bearing

PA0160

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

No comments

Ariens 927055 - RM1332 Specifications Page 29