Ariens 915167-Zoom XL 54 Specifications download pdf (Page 14)

GB - 14

Timer (TMR1): measures the time spent on

individual jobs.

Press and hold the toggle button to reset the

timer to zero. TMR1 will then start measuring

engine run time until it is reset to zero again.

Service Alert (Chg Oil, Chg H Oil & Filter,

SVC Airfilter): reminds operators of the

maintenance interval for changing the engine

oil, changing the hydraulic oil and filter and

servicing the air filter.

The alert starts counting down two hours

before the maintenance is due. The meter

flashes the word, "Now," when it reaches the

maintenance time.

Press and hold the toggle button to reset the

maintenance clock to zero after perfoming

the service.

NOTE: The hour meter is preprogrammed for

the initial oil change at 25 hours and for 100

hours thereafter. The hour meter is

programmed for the initial hydraulic oil and

filter change at 75hours and for 400 hours

thereafter.

Steering Levers

• Reverse (1) – Pull both steering levers

backward.

• Forward (2) – Push both steering levers

forward.

• Left (3) – Pull left steering lever back or

push right steering lever forward or a

combination of both.

• Right (4) – Pull right steering lever back

or push left steering lever forward or a

combination of both.

NOTE: To stop, return both steering levers to

neutral.

NOTE: The steering levers must be in the

neutral position to start the engine.

NOTE: The parking brake must be

disengaged prior to moving the steering

levers from the neutral position.

Mower Lift Pedal (Figure 6)

Raises and lowers the deck.

NOTE: The adjustment pin is used to set the

height of the mower deck. See

SPECIFICATIONS on page 30 for cutting

height dimensions.

Press mower lift pedal and install adjustment

pin in the desired adjustment hole.

NOTE: Adjusting the seat

further forward will help

increase the leverage in

lifting the mower deck (see

Adjusting Seat on

page 15).

Display

Toggle Button

1

2

3

4

Figure 6

1. Adjustment Pin

2. Mower Lift Pedal

3. Adjustment Hole

1

3

2

02988000

7

08088400A

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

Comments to this Manuals

No comments