Ariens 915145-Zoom XL 42 Specifications download pdf (Page 10)

GB - 10

Tools Required

• Adjustable wrench

• 9/16" wrench

• Petroleum jelly or dielectric grease.

Unpack Unit

Remove unit and all other components from

the shipping container. Engage transmission

bypass lever (see MOVING UNIT

MANUALLY on page 14). Push unit from

container onto a level surface. Disengage

transmission bypass lever.

Connect Battery

See Battery Removal and Installation on

page 21 and perform steps 2 and 3 in the

installation section.

Place Unit in Operating Position

(figure 3):

NOTE: The unit is shipped with the seat

positioned as far back as possible.

1. Tip seat forward and adjust the seat as

needed (see ADJUSTING STEERING

LEVERS on page 22).

2. Remove eccentric spacers and rotate

steering levers to the operating position.

reinstall spacers. Do not tighten.

3. Adjust steering levers (see ADJUSTING

STEERING LEVERS on page 22).

Place Discharge Chute in Operating

Position

Prior to operating the unit, remove the

discharge chute from the transport position

and place the discharge chute in the

operating position (figure 4).

ASSEMBLY

WARNING: AVOID INJURY. Read

and understand the entire Safety

section before proceeding.

Figure 3

2

4

3

1

1. Seat

2. Steering

Lever

3. Eccentric

Spacer

4. Handlebar

Brackets

3

WARNING: Do not operate

mower unless the discharge chute

is in the operating position.

Figure 4

Discharge Chute in Transport Position

Discharge Chute in Operating Position

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Comments to this Manuals

No comments